About 3D Printing 304 Stainless Steel Powder:304 powder has good corrosion resistance and durability. Its spherical particles can be positioned parallel to the surface of the coating film and distributed in the…
About 3D Printing 304 Stainless Steel Powder:
304 powder has good corrosion resistance and durability. Its spherical particles can be positioned parallel to the surface of the coating film and distributed in the entire coating film, forming a shielding layer with excellent hiding power to block moisture. 304 stainless steel is a kind of common material in stainless steel, the density is 7.93 g/cm³. High-temperature resistance of 800℃ has the characteristics of good processing performance, high toughness, widely used in industry, furniture decoration industry and food and medical industry.304 is a kind of universal stainless steel, which is widely used in the production of equipment and parts requiring good comprehensive properties (corrosion resistance and formability).In order to maintain the inherent corrosion resistance of stainless steel, the steel must contain at least 18% chromium and at least 8% nickel. For 304 stainless steel, the Ni element in its composition is very important, directly determines the corrosion resistance of 304 stainless steel and its value.
The most important elements in 304 are Ni and Cr, but they are not limited to them. The specific requirements are specified in the product standard. Industry common determination that as long as the Ni content is greater than 8%, Cr content is greater than 18%, you can be considered to be 304 stainless steel.
In determining the type of stainless steel to be selected, the main consideration is the aesthetic standards required, the corrosive atmosphere of the location and the cleaning system to be used. Increasingly, however, other applications simply seek structural integrity or impermeability. For example, the roofs and sidewalls of industrial buildings. In these applications, the owner’s cost of construction may be more important than aesthetics, even if the surface is not very clean.304 stainless steel works well in dry indoor environments. However, in rural and urban areas, frequent washing is needed to maintain its appearance outdoors. In heavily polluted industrial areas and coastal areas, the surface can be very dirty and even rust. Feel free to send an inquiry to get the latest price if you would like to buy 3D Printing 304 Stainless Steel Powder in bulk.
Main elements of 304 ss powder:
Mn | Ni | Cr |
≤2.00 | 8.0-12.0 | 8.0-20.0 |
Impurity elements of 304 ss powder:
C | Si | P | S | O |
≤0.08 | ≤1.00 | ≤0.045 | ≤0.03 | ≤0.05 |
304 ss powder Morphology: Spherical
304 ss powder Purity: 99.9%
304 ss powder Particle size: 0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm
304 ss powder Appearance: grey powder
304 ss powder Package: Aluminum bag,Vacuum packing
304 ss powder Application: 3D printing metal powder
304 ss powder Other applications: powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.
How is 3D Printing 304 Stainless Steel Powder produced?
A metal stainless steel powder made from a stainless steel alloy. The particle shape is regular spherical, the density is 7.9g/cm3, the average particle size<33 mum. With good corrosion resistance and durability, its spherical particles can be parallel to the surface of the coating and distributed in the entire coating, forming a shielding layer with excellent hiding power, the moisture blocking. It can also be used for sandblasting machines to process some high precision machining parts. Stainless steel powder using low carbon steel containing chromium 18% ~ 20%, nickel 10% ~ 12%, molybdenum about 3% of the stainless steel as raw material, after atomization, in the presence of lubricant (stearic acid) ball milling, screening classification into pigments, can also be directly wet ball milling.
Applications of 3D Printing 304 Stainless Steel Powder:
304 stainless steel is one of the most widely used chromium-nickel stainless steel, as a widely used steel, has good corrosion resistance, heat resistance, low-temperature strength and mechanical properties; Stamping, bending and another thermal processability is good, no heat treatment hardening phenomenon (use temperature -196℃ ~ 800℃). Corrosion resistance in the atmosphere, if it is an industrial atmosphere or heavily polluted areas, it is necessary to clean in time to avoid corrosion.
Suitable for food processing, storage and transportation.
It has good machinability and weldability.
Plate heat exchangers, bellows, household articles (class 1 and 2 tableware, cabinets, indoor pipes, water heaters, boilers, bathtubs), auto parts (windshield wipers, silencers, mold products), medical appliances, building materials, chemistry, food industry, agriculture, ship parts, etc.
Storage Condition of 304 Stainless Steel Powder:
The damp reunion will affect 304 powder dispersion performance and using effects, therefore, 304 Stainless Steel Powder should be sealed in vacuum packing and stored in cool and dry room, the 304 Stainless Steel Powder can not be exposure to air. In addition, the 304 powder should be avoided under stress.
Packing & Shipping of 304 Stainless Steel Powder:
We have many different kinds of packing which depend on the 304 Stainless Steel Powder quantity.
304 Stainless Steel Powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
304 Stainless Steel Powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.
304 Stainless Steel Powder Properties |
Other Names | 304 powder, 304 stainless steel powder |
CAS No. | N/A |
Compound Formula | N/A |
Molecular Weight | N/A |
Appearance | Grey powder |
Melting Point | N/A |
Solubility in water | N/A |
Density | N/A |
Purity | N/A |
Particle Size | 0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm |
Boling point | N/A |
Specific Heat | N/A |
Thermal Conductivity | N/A |
Thermal Expansion | N/A |
Young’s Modulus | N/A |
Exact Mass | N/A |
Monoisotopic Mass | N/A |
| |
| |
304 Stainless Steel Powder Health & Safety Information |
Safety Warning | N/A |
Hazard Statements | N/A |
Flashing point | N/A |
Hazard Codes | N/A |
Risk Codes | N/A |
Safety Statements | N/A |
RTECS Number | N/A |
Transport Information | N/A |
WGK Germany | N/A |
About 3D Printing 316 Powder Stainless Steel Powder:Stainless steel 316 is an iron-based alloy containing at least 10.5% chromium. They achieve their stainless steel properties by forming an invisible, attached chromium-rich oxide…
About 3D Printing 316 Powder Stainless Steel Powder:
Stainless steel 316 is an iron-based alloy containing at least 10.5% chromium. They achieve their stainless steel properties by forming an invisible, attached chromium-rich oxide film.316 alloy is a kind of universal austenitic stainless steel with a face-centered cubic structure. It is essentially non-magnetic in the annealed state and can only be hardened by cold work. In order to improve the corrosion resistance of the alloy, especially in the environment containing chlorine, molybdenum is added, and the low carbon content of 316L alloy gives it better corrosion resistance in the welded tissue. Feel free to send an inquiry to get the latest price if you would like to buy 3D Printing 316 Powder Stainless Steel Powder in bulk.
3D printing powder Main elements of 316L stainless steel powder:
Cr | Ni | Mo | Mn | Fe |
16.00-18.00 | 10.0-14.0 | 2.0-3.0 | ≤2.00 | Bal |
3D printing powder Impurity elements of 316L stainless steel powder
Si | P | S | C | O |
≤1.00 | ≤0.04 | ≤0.03 | ≤0.03 | ≤0.05 |
3D printing powder Morphology: Spherical
3D printing powder Purity: 99.9%
3D printing powder powder Particle size: 0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm
3D printing powder Appearance: grey powder
3D printing powder Package: Aluminum bag, Vacuum packing
3D printing powder Application: 3D printing metal powder
3D printing powder Other applications: powder metallurgy(PM), injection molding(MIM), spray painting(SP), etc.
How is 3D Printing 316 Powder Stainless Steel Powder produced?
316 alloy is a kind of universal austenitic stainless steel with a face-centered cubic structure. It is essentially non-magnetic in the annealed state and can only be hardened by cold work.
Applications of 3D Printing 316 Powder Stainless Steel Powder:
The application range of 316 alloy powder is as follows:
A) Aerospace, Construction, Automotive, Chemicals, Fasteners, Electronics, Food Processing, Furnaces and Fixtures, Hardware, Jewelry, Cryogenic Environment, Marine and Seawater Environment, Office Equipment, Pharmaceuticals, Welding, Pulp and Paper Manufacturing.
B) Special stainless steel powder with corrosion resistance, surface finish, wear resistance, machinability, oxidation resistance, electroplating free, high-temperature strength and low expansion coefficient.
C) Injection-molded metal parts.
D) Additives for manufacturing stainless steel powder are available.
Storage Condition of 316 Powder Stainless Steel Powder:
The damp reunion will affect 316 powder dispersion performance and using effects, therefore, 316 powder stainless steel powder should be sealed in vacuum packing and stored in cool and dry room, the 316 powder stainless steel powder can not be exposure to air. In addition, the 316 powder should be avoided under stress.
Packing & Shipping of 316 Powder Stainless Steel Powder:
We have many different kinds of packing which depend on the 316 powder stainless steel powder quantity.
316 powder stainless steel powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
316 powder stainless steel powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.
316 Stainless Steel Powder Properties |
Other Names | 316 powder, stainless steel powder, 316 stainless steel powder |
CAS No. | N/A |
Compound Formula | N/A |
Molecular Weight | N/A |
Appearance | Grey powder |
Melting Point | N/A |
Solubility in water | N/A |
Density | N/A |
Purity | 99% |
Particle Size | 0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm |
Boling point | N/A |
Specific Heat | N/A |
Thermal Conductivity | N/A |
Thermal Expansion | N/A |
Young’s Modulus | N/A |
Exact Mass | N/A |
Monoisotopic Mass | N/A |
| |
| |
316 Stainless Steel Powder Health & Safety Information |
Safety Warning | N/A |
Hazard Statements | N/A |
Flashing point | N/A |
Hazard Codes | N/A |
Risk Codes | N/A |
Safety Statements | N/A |
RTECS Number | N/A |
Transport Information | N/A |
WGK Germany | N/A |
About 3D Printing Ti6Al4V Powder TC4 Powder:Ti6Al4V referred to as TC4, is an α-β titanium alloy with a high strength-to-weight ratio and excellent corrosion resistance. It is one of the most commonly…
About 3D Printing Ti6Al4V Powder TC4 Powder:
Ti6Al4V referred to as TC4, is an α-β titanium alloy with a high strength-to-weight ratio and excellent corrosion resistance. It is one of the most commonly used titanium alloys and is widely used in low density and excellent corrosion resistance is necessary for such aerospace industry and biomechanical applications (implants and prostheses).Ti6Al4V is generally considered to be the “base” of the titanium industry because it is by far the most widely used titanium alloy, more than 50% of the total amount of titanium. It is an α+β alloy that can be heat treated to achieve moderate strength. Titanium 6 aluminum 4 vanadium is recommended for use at temperatures not exceeding 350℃/660℉.
The composition of TC4 titanium base powder is Ti6Al4V, which belongs to (α+β) type titanium alloy, and has good comprehensive mechanical properties.TC4 titanium alloy has excellent corrosion resistance. It has a series of advantages such as low density, high specific strength, good toughness, good weldability and so on. It has been used in aerospace, petrochemical, shipbuilding, automobile, pharmaceutical and other industries.
Compared with traditional stainless steel and cobalt-based alloys, titanium alloys are increasingly used as biomaterials due to their lower modulus, excellent biocompatibility and enhanced corrosion resistance. These attractive properties have been the driving force for the early introduction of (CpTi) and A # B (Ti6Al4V) alloys, as well as for the newer development of new titanium alloy compositions and orthopedic metastable B titanium alloys.Alloy.The latter has enhanced biocompatibility, reduced elastic modulus, and excellent strain control and notch fatigue strength. However, the poor shear strength and wear resistance of titanium alloys still limit their biomedical applications. Although some improvement has been shown in the wear resistance of B-Ti alloys compared to A # B alloys, the end-use of orthopedic titanium alloys as wear components will require a more complete basic understanding of the wear mechanisms involved. Feel free to send an inquiry to get the latest price if you would like to buy 3D Printing Ti6Al4V Powder TC4 Powder in bulk.
Main elements:
Al | V | Ti |
5.50-6.75 | 3.50-4.50 | Bal |
Impurity elements:
Fe | C | N | H | O | Y |
≤0.3 | ≤0.08 | ≤0.05 | ≤0.015 | ≤0.2 | ≤0.005 |
category | Alloy grades and characteristics |
Alloy number: | TA0,TA1,TC4,TC4 ELI,TC11,TC17,TC18,TC21,TA7,TA12,TA15,TA17,TA19,
Ti40,Ti60,TiAl(Ti36Al,Ti48Al2Cr2Nb),TiNi,TiNb,ZrTi |
Particle size: | 0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm |
Morphology: | Spherical or nearly spherical |
Appearance: | Grey |
Package: | Aluminum bag,Vacuum packing |
Application: | 3D printing metal powder |
Other applications: | powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc. |
How is 3D Printing Ti6Al4V Powder TC4 Powder produced?
Ti6Al4V was heat-treated to change the content of Ti6Al4V and the phase in the microstructure of the alloy. The microstructure will vary greatly according to the exact heat treatment and processing method. Three common heat treatment processes are mill annealing, two-phase annealing, solution treatment and aging treatment.
Applications of 3D Printing Ti6Al4V Powder TC4 Powder:
Ti6Al4V has the characteristics of good hardness, lightweight, formability and corrosion resistance, and is widely used in the aviation industry.
Ti6Al4V can be used in low to medium temperature environments where high strength, lightweight and excellent corrosion resistance are required. Such as aircraft steam turbine engine parts, aircraft structural parts, aviation fasteners, high-performance automatic parts, ships, medical equipment and sports equipment.
Implant and prosthesis (forged, cast or made by solid free-forming (SFF)) additive manufacturing.
Parts and prototypes for the racing and aerospace industries.
It is widely used in the Boeing 787.
Marine applications.
The chemical industry.
Gas turbines.
The gun silencer.
Storage Condition of Ti6Al4V Powder TC4 Powder:
The damp reunion will affect Ti6Al4V powder dispersion performance and using effects, therefore, titanium aluminum carbide Ti6Al4V powder should be sealed in vacuum packing and stored in cool and dry room, the TC4 can not be exposure to air. In addition, the Ti6Al4V powder should be avoided under stress.
Packing & Shipping of Ti6Al4V Powder TC4 Powder:
We have many different kinds of packing which depend on the Ti6Al4V powder quantity.
TC4 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
TC4 powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.
Ti6Al4V Powder TC4 Powder Properties |
Other Names | Ti6Al4V Powder, TC4 Powder |
CAS No. | N/A |
Compound Formula | TA0,TA1,TC4,TC4 ELI,TC11,TC17,TC18,TC21,TA7,TA12,TA15,TA17,TA19,
Ti40,Ti60,TiAl(Ti36Al,Ti48Al2Cr2Nb),TiNi,TiNb,ZrTi |
Molecular Weight | N/A |
Appearance | Grey powder |
Melting Point | N/A |
Solubility in water | N/A |
Density | N/A |
Purity | 99% |
Particle Size | 0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm |
Boling point | N/A |
Specific Heat | N/A |
Thermal Conductivity | N/A |
Thermal Expansion | N/A |
Young’s Modulus | N/A |
Exact Mass | N/A |
Monoisotopic Mass | N/A |
| |
| |
Ti6Al4V Powder TC4 Powder Health & Safety Information |
Safety Warning | N/A |
Hazard Statements | N/A |
Flashing point | N/A |
Hazard Codes | N/A |
Risk Codes | N/A |
Safety Statements | N/A |
RTECS Number | N/A |
Transport Information | N/A |
WGK Germany | N/A |
About 3D Printing Inconel Alloy In625 Powder:Inconel 625 is a high-performance nickel-based superalloy known for its high level of strength, high temperature and corrosion resistance. This superalloy consists mainly of nickel (at…
About 3D Printing Inconel Alloy In625 Powder:
Inconel 625 is a high-performance nickel-based superalloy known for its high level of strength, high temperature and corrosion resistance. This superalloy consists mainly of nickel (at least 58%), followed by chromium, molybdenum, niobium, iron, tantalum, cobalt, and trace amounts of manganese, silicon, aluminum, and titanium. It can withstand high pressures and a wide range of temperatures. Inconel 625 has a melting point of about 1300°C and a thermal expansion coefficient of 1.28 × 10-5 1/K(at 20°C). It can resist all kinds of extreme temperatures from low to very high.
Inconel625 has a density of 8.4 g/cm3 and a melting point of 1290-1350℃. It has excellent corrosion resistance to inorganic acid and various corrosive media in oxidation and reduction environments. Resistant to carbonation and oxidation in static or circulating environments, and to chlorine-containing gas corrosion
Inconel625 alloys exhibit excellent corrosion resistance in many media. Its excellent resistance to pitting, crevice, intergranular corrosion and erosion in chloride media, as well as its ability to resist corrosion in highly acidic environments, make it a suitable choice for nuclear and marine applications.
625 alloys exhibit excellent corrosion resistance in a wide range of media. Excellent resistance to pitting, crevice corrosion, intergranular corrosion and corrosion in chloride media. It has good corrosion resistance to inorganic acids, such as nitric acid, phosphoric acid, sulfuric acid, hydrochloric acid, etc. At the same time, it also has alkali and organic acid corrosion resistance in oxidation and reduction environments. Effective resistance to chloride ion reduction stress corrosion cracking. It is almost non-corrosive in seawater and industrial gas environments and has high corrosion resistance to seawater and salt solutions, as well as at high temperatures.No sensitivity during welding. Resistant to carbonation and oxidation in static or circulating environments, and to chlorine-containing gas corrosion. Feel free to send an inquiry to get the latest price if you would like to buy 3D Printing Inconel Alloy In625 Powder in bulk.
Composition for nickel based alloy powder In625 (percentage by mass):
Cr | Mo | Co | Nb | Al | S | Ni |
20-23 | 8-10 | 1 max | 3.15-4.15 | 0.4 max | 0.015 max | Bal |
Ti | C | Fe | Mn | Si | P | Cu |
0.4 max | 0.1 max | 5 max | 0.5 max | 0.5 max | 0.015 max | 0.07 max |
category | Alloy grades and characteristics |
Alloy number: | Nickel-based alloy IN625 powder |
Particle size: | 15-45μm, 15-53μm, 53-120μm, 53-150μm |
Morphology: | Spherical |
Appearance: | Grey |
Package: | Aluminum bag, Vacuum packing |
Application: | 3D printing metal powder |
Other applications: | powder metallurgy(PM), injection molding(MIM), spraying coating(SP) etc. |
How is 3D Printing Inconel Alloy In625 produced?
The production and composition of the Inconel 625 depend on the specifications required for the material.
In order to improve the toughness of the material, heat treatment of the alloy is necessary.In the case of Inconel 625, the following treatments can be used:
High solution annealing: Soak at 1095-1205 ° C (up to 1 hour), then the lower temperature in ambient air or cooling medium. The result is an alloy with superior creep resistance.
Low solubility annealing: This is similar to high solubility annealing but at a lower temperature of 925-1040°C.The alloys produced have good tensile strength and ductility.
Stress relief: This process involves soaking at 900°C for up to 4 hours, followed by cooling in the surrounding air. The final product has excellent integrity in low-temperature environments, as well as optimal strength and stress resistance.
Forging Inconel 625 requires a furnace temperature between 1010 °C and 1150°C. Anything below this range may cause hardness and require reheating of the material.
Applications of 3D Printing Inconel Alloy In625 Powder:
Inconel 625 applications
After softening annealing, low carbon alloy 625 is widely used in the chemical process industry. Its good corrosion resistance and high strength enable it to be used as a thinner structural component.625 alloy can be used in contact with seawater and subjected to high mechanical stress.
Marine application
Due to its high corrosion resistance, especially pitting and cracking resistance, the Inconel 625 is ideal for high-salt, subsea applications. The material is used as propeller blades for ships, mooring lines for fixing ships and similar ships, accessories and fixtures for submarines, and components for marine equipment.
Aerospace equipment
The superalloy has also found its way into the aircraft industry, especially for exhaust equipment, fuel pipes, heat exchanger casings and rocket parts.That’s because the Inconel 625 works well even at extreme temperatures and pressures.
Nuclear technology
Inconel 625’s strength and corrosion and stress resistance make it a suitable component for nuclear reactors, especially control rods and cores. Nuclear systems also typically involve temperatures in excess of 650°C, which Inconel 625’s strength can withstand.
Industrial processes
Because the alloy is easy to manufacture and resistant to high temperatures and corrosion, it is a useful component in the production of manufacturing equipment such as vessels, heat exchangers, valves and fluid distribution systems. Its excellent weldability also makes it a suitable component for pipes used in manufacturing plants.
Storage Condition of Inconel Alloy In625 Powder:
The damp reunion will affect In625 powder dispersion performance and using effects, therefore, Inconel alloy In625 powder should be sealed in vacuum packing and stored in a cool and dry room, the Inconel alloy In625 powder can not be exposure to air. In addition, the Inconel alloy In625 powder should be avoided under stress.
Packing & Shipping of Inconel Alloy In625 Powder:
We have many different kinds of packing which depend on the Inconel alloy In625 powder quantity.
Inconel alloy In625 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Inconel alloy In625 powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.
Tqhp Nano Technology Co. Ltd. (Tqhp) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
If you are looking for high-quality In625 powder, please feel free to contact us and send an inquiry. ([email protected])
Inconel Alloy In625 Powder Properties |
Other Names | INCO 625 |
CAS No. | N/A |
Compound Formula | Ni Cr Fe Mo Nb |
Molecular Weight | N/A |
Appearance | Metallic Powder |
Melting Point | 1290-1350 °C |
Solubility in water | N/A |
Density | N/A |
Purity | 99% |
Particle Size | 15-45μm, 15-53μm, 53-120μm, 53-150μm |
Boling point | N/A |
Specific Heat | N/A |
Thermal Conductivity | 9.8 W/m·°C (21 °C) |
Thermal Expansion | N/A |
Young’s Modulus | N/A |
Exact Mass | N/A |
Monoisotopic Mass | N/A |
| |
| |
Inconel Alloy In625 Powder Health & Safety Information |
Safety Warning | Danger |
Hazard Statements | H317-H351-H372 |
Flashing point | N/A |
Hazard Codes | Xn |
Risk Codes | N/A |
Safety Statements | N/A |
RTECS Number | N/A |
Transport Information | NONH for all modes of transport |
WGK Germany | N/A |
About 3D Printing Aluminum Based Alloy AlSi7Mg Powder:AlSi7Mg is a heat-treatable aluminum alloy widely used in the manufacture of lightweight functional components in the automotive and aerospace industries. This material maintains a high mass…
About 3D Printing Aluminum Based Alloy AlSi7Mg Powder:
AlSi7Mg is a heat-treatable aluminum alloy widely used in the manufacture of lightweight functional components in the automotive and aerospace industries. This material maintains a high mass strength ratio and has good corrosion resistance, making it an ideal application for aluminum alloys that require a combination of excellent thermal properties and low weight.AlSi7Mg is a cast aluminum alloy with good teachability, low density and good corrosion resistance. Therefore, its castings are widely used in aviation, instrument and general machinery, such as automobile engine cylinder head, intake manifold, piston, wheel hub, steering booster shell and so on.
AlSi7Mg powder is another 3D-printed powder for SLM to produce parts with good hardness, strength, lightweight and machinability. The chemical composition of AlSi7Mg is similar to that of F357 aluminum alloy. Tqhp is a trusted global 3D Printing Aluminum Based Alloy AlSi7Mg Powder supplier. Feel free to send an inquiry about the latest price of Aluminum Based Alloy AlSi7Mg at any time.
Product Performance of 3D Printing Aluminum Based Alloy Powder AlSi7Mg Powder :
The AlSi7Mg powder has high powder sphericity, smooth surface, less satellite balls, low oxygen content, uniform particle size distribution, good fluidity and high bulk density and tap density.
Technical Parameter of 3D Printing Aluminum Based Alloy Powder AlSi7Mg Powder :
Product Name | Si | Mn | Zn | Al | Mg | Cu | Ti |
AlSi7Mg | 6.5-6.7% | ≤0.1% | ≤0.1% | Bal. | 0.5-0.8% | ≤0.05% | ≤0.2% |
How is 3D Printing Aluminum Based Alloy AlSi7Mg Powder Produced?
A method of preparation of aluminum alloy powder material, including the following steps: providing a molten metal or alloy liquid steps, using the fast-moving way, with the impact of gas will be described in the molten metal or alloy liquid broken into metal droplet steps, will become a solid powder the metal droplet condensation step, among them, the metal droplet than described in the molten metal or alloy liquid tiny. The aluminum base alloy powder obtained by this preparation method has a uniform chemical composition, a high proportion of amorphous composition, fine particles, small particle distribution range, regular shape, low oxygen content and high powder forming rate. It is suitable for the industrial production of powder raw materials and provides powder raw materials for the preparation of bulk aluminum base alloy by powder metallurgy and the preparation of amorphous aluminum base alloy protective coating by cold spraying.
Applications of 3D Printing Aluminum Based Alloy AlSi7Mg Powder:
Aluminum alloys are widely used in engineering structures and components where lightweight or corrosion resistance is required. Alloys composed mainly of aluminum have played a very important role in aerospace manufacturing since the advent of metal-clad aircraft.
AlSi7Mg powder can be used to manufacture lightweight functional components in the automotive and aerospace industries.
AlSi7Mg powder can be used in laser/electron beam additive manufacturing (SLM/EBM), powder metallurgy (PM), spraying and other processes.AlSi7Mg powder is widely used in aerospace parts, automotive parts, profile surface spraying, powder metallurgy and other fields.
Storage Condition of Aluminum Based Alloy Powder AlSi7Mg Powder:
The damp reunion will affect AlSi7Mg powder dispersion performance and using effects, therefore, aluminum-based alloy powder AlSi7Mg powder should be sealed in vacuum packing and stored in cool and dry room, the aluminum-based alloy powder AlSi7Mg powder can not be exposure to air. In addition, the AlSi7Mg powder should be avoided under stress.
Packing & Shipping of Aluminum Based Alloy Powder AlSi7Mg Powder:
We have many different kinds of packing which depend on the aluminum based alloy powder AlSi7Mg powder quantity.
Aluminum based alloy powder AlSi7Mg powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Aluminum based alloy powder AlSi7Mg powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.
Alloy AlSi7Mg Powder Properties |
Other Names | 3D printing powder, AlSi7Mg, AlSi7Mg Powder |
CAS No. | N/A |
Compound Formula | AlSi7Mg |
Molecular Weight | N/A |
Appearance | N/A |
Melting Point | N/A |
Solubility in water | N/A |
Density | N/A |
Purity | 99.90% |
Particle Size | 0-45μm, 0-53μm,15-45μm, 15-53μm, 45-105μm |
Boling point | N/A |
Specific Heat | N/A |
Thermal Conductivity | N/A |
Thermal Expansion | N/A |
Young’s Modulus | N/A |
Exact Mass | N/A |
Monoisotopic Mass | N/A |
| |
| |
Alloy AlSi7Mg Powder Health & Safety Information |
Safety Warning | N/A |
Hazard Statements | N/A |
Flashing point | N/A |
Hazard Codes | N/A |
Risk Codes | N/A |
Safety Statements | N/A |
RTECS Number | N/A |
Transport Information | N/A |
WGK Germany | N/A |
About 3D Printing Stainless Steel SS316L Powder:316 stainless steel powder has more carbon in it than 316L. This is easy to remember, as the L stands for “low.” But even though it has less carbon, 316L is very…
About 3D Printing Stainless Steel SS316L Powder:
316 stainless steel powder has more carbon in it than 316L. This is easy to remember, as the L stands for “low.” But even though it has less carbon, 316L is very similar to 316 in almost every way. Cost is very similar, and both are durable, corrosion-resistant, and a good choice for high-stress situations.
If you want to know 316l powder price, please send inquiry to sales1@rboschco.com
In addition to chromium and nickel, these alloys contain molybdenum, which also makes them more corrosion resistant. Even greater corrosion resistance is delivered by 317L, in which molybdenum content increases to 3 to 4% from the 2 to 3% found in 316 and 316L.
Iron-base alloys containing different sufficient CHROMIUM to form a stable passive film on the surface.
10.5% is the qualifying concentration of Cr for an alloy to be called Stainless Steel.
316L stainless steel powder has excellent resistance to corrosion; High toughness and good ductility; Moderate strength, hardenable by cold work; High resistance to oxidation at elevated temperature; Low thermal conductivity; High coefficient of thermal expansion; Non-magnetic Not heat treatable; 316L stainless steel is the molybdenum that enhances corrosion resistance in environments rich in salt air and chloride – giving 316L powder the moniker of “marine grade” stainless steel. As long as the invisible film – or passive layer – remains intact, the metal remains stain-less and corrosion-resistant. Feel free to send an inquiry to get the latest price if you would like to buy 3D Printing Stainless Steel SS316L Powder in bulk.
Supply 3D printing stainless steel powder SS 316L
Main elements of stainless steel powder 316L:
Cr | Ni | Mo | Mn | Fe |
16.00-18.00 | 10.0-14.0 | 2.0-3.0 | ≤2.00 | Bal |
Impurity elements of stainless steel powder 316L:
Si | P | S | C | O |
≤1.00 | ≤0.04 | ≤0.03 | ≤0.03 | ≤0.05 |
Stainless steel powder 316L Morphology: Spherical
Stainless steel powder 316L Purity: 99.9%
Stainless steel powder 316L Particle size: 0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm
Stainless steel powder 316L Appearance: grey powder
Stainless steel powder 316L Package: Aluminum bag,Vacuum packing
Stainless steel powder 316L Application: 3D printing metal powder
Stainless steel powder 316L Other applications: powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.
How is 3D Printing Stainless Steel SS316L Powder produced?
Type 316 steel is an austenitic chromium-nickel stainless steel containing 2% to 3% molybdenum. The molybdenum content improves corrosion resistance, resistance to pitting in chloride ion solutions, and high-temperature strength.
Stainless steel3D printing is produced by melting or laser sintering. There are two possible technologies for this material: DMLS and SLM. At Sculpteo, we use DMLS (Direct Metal Laser Sintering) technology, which is a laser sintering technology on EOS M280 machines for printing stainless steel.
Applications of 3D Printing Stainless Steel SS316L Powder:
Like aluminum and titanium, stainless steel can be used to 3D print complex designs that are normally impossible to accomplish. It can also produce large objects, owing to its strength. Thanks to 3D printing technology, stainless steel is soon to be put into even more uses.
As with traditional stainless steel, 3D-printed stainless steels find applications in a wide range of areas include:
Jewelry.
Tools.
Construction applications.
Dental caps.
Metal implants.
Industrial applications – designing functional components.
Decorative models like statues, medals and keys.
Military applications.
Storage Condition of Stainless Steel SS316L Powder:
Damp reunion will affect SS316L powder dispersion performance and using effects, therefore, stainless steel SS316L powder should be sealed in vacuum packing and stored in cool and dry room, the stainless steel SS316L powder can not be exposure to air. In addition, the stainless steel SS316L powder should be avoided under stress.
Packing & Shipping of Stainless Steel SS316L Powder:
We have many different kinds of packing which depends on the stainless steel SS316L powder quantity.
Stainless steel SS316L powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Stainless steel SS316L powder shipping:could be shipped out by sea , by air, by express?as soon as possible once payment receipt.
Tqhp Nano Technology Co. Ltd. (Tqhp) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
If you are looking for high-quality 316L powder, please feel free to contact us and send an inquiry. ([email protected])
Stainless Steel Powders SS316L Properties |
Other Names | Stainless Steel Powders, SS316 powder, SS316L powder |
CAS No. | 52013-36-2 |
Compound Formula | SS316L |
Molecular Weight | N/A |
Appearance | Grey black powder |
Melting Point | N/A |
Solubility in water | N/A |
Density | 7.9g/cm3 |
Purity | 99.90% |
Particle Size | 0-20μm, 15-45μm, 15-53μm,53-105μm, 53-150μm, 105-250μm |
Boling point | N/A |
Specific Heat | N/A |
Thermal Conductivity | N/A |
Thermal Expansion | N/A |
Young’s Modulus | N/A |
Exact Mass | N/A |
Monoisotopic Mass | N/A |
| |
| |
Stainless Steel Powders SS316L Health & Safety Information |
Safety Warning | N/A |
Hazard Statements | N/A |
Flashing point | N/A |
Hazard Codes | N/A |
Risk Codes | N/A |
Safety Statements | N/A |
RTECS Number | N/A |
Transport Information | N/A |
WGK Germany | N/A |
About 3D Printing Alloy WC-Co Powder:Product name: Spherical Tungsten Carbide PowderProduct Specifications: 5-25μm, 15-45μm, 15-53μm, 45-75μm, 45-105μm, 75-150μm. (Can be customized according to customer requirements) Powder properties: high purity (≥99.9%), low oxygen (≤300ppm), high…
About 3D Printing Alloy WC-Co Powder:
Product name: Spherical Tungsten Carbide Powder
Product Specifications: 5-25μm, 15-45μm, 15-53μm, 45-75μm, 45-105μm, 75-150μm. (Can be customized according to customer requirements)
Powder properties: high purity (≥99.9%), low oxygen (≤300ppm), high sphericity (≥95%), smooth surface, no satellite ball, uniform particle size distribution, excellent flow performance (≤10.0s/50g), high loose density (≥7.0g/cm3) and vibration density (≥7.5g/cm3).
Applicable technology: Laser/electron beam additive manufacturing (SLM/EBM), laser direct deposition (DLD), hot isostatic powder molding (HIP), metal injection molding (MIM), powder metallurgy (PM), laser deposition (LC) and other processes.
Powder application: Tungsten-cobalt carbide is a kind of tungsten carbide composed of WC and Co metal, according to the different cobalt content can be divided into high cobalt (≥20%), medium cobalt (≥10%), low cobalt (≥3%) three types, cobalt for bonding phase, tungsten carbide for hard phase. Rf plasma spheroidized TUNGSTEN carbide and cobalt hard alloy powder has the characteristics of uniform distribution of cobalt elements, high sphericity, good fluidity, large loose density, dense particles inside, less hollow powder and so on. It can be used in cemented carbide, diamond tools, die casting mold, welding materials, vacuum coating, thermal spraying and so on.
Composition(percentage by mass):
Storage Condition of Spherical Tungsten Carbide-Cobalt Cemented Alloy Powder:
Damp reunion will affect spherical tungsten carbide-cobalt cemented alloy powder dispersion performance and using effects. Therefore, spherical tungsten carbide-cobalt cemented alloy powder should be sealed in vacuum packing and stored in cool and dry room, the spherical tungsten carbide-cobalt cemented alloy powder can not be exposed to air. In addition, the spherical tungsten carbide-cobalt cemented alloy powder should be avoided under stress.
Packing & Shipping of Spherical Tungsten Carbide-Cobalt Cemented Alloy Powder:
We have many different kinds of packing which depends on the spherical tungsten carbide-cobalt cemented alloy powder quantity.
spherical tungsten carbide-cobalt cemented alloy powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
spherical tungsten carbide-cobalt cemented alloy powder shipping:could be shipped out by sea , by air, by express as soon as possible once payment receipt.
3D Printing Alloy Spherical Tungsten Carbide-Cobalt Powder Properties |
Other Names | Tungsten Carbide-Cobalt Powder |
CAS No. | N/A |
Compound Formula | WC-Co |
Molecular Weight | N/A |
Appearance | Gray metallic solid in various forms (ingot, tubing, pieces, powder) |
Melting Point | N/A |
Solubility in water | N/A |
Density | NA |
Purity | N/A |
Particle Size | 0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm |
Boling point | N/A |
Specific Heat | N/A |
Thermal Conductivity | N/A |
Thermal Expansion | N/A |
Young’s Modulus | N/A |
Exact Mass | N/A |
Monoisotopic Mass | N/A |
| |
| |
3D Printing Alloy Spherical Tungsten Carbide-Cobalt Health & Safety Information |
Safety Warning | N/A |
Hazard Statements | N/A |
Flashing point | N/A |
Hazard Codes | N/A |
Risk Codes | N/A |
Safety Statements | N/A |
RTECS Number | N/A |
Transport Information | N/A |
WGK Germany | N/A |
About 3D Printing Alloy Spherical Tungsten Carbide WC Powder:Product name: Spherical Tungsten Carbide WC Powder Product specifications: 15-45μm, 15-53μm, 45-75μm, 45-105μm, 75-150μm. (Various granularities can be customized according to customer requirements) Powder characteristics: controllable…
About 3D Printing Alloy Spherical Tungsten Carbide WC Powder:
Product name: Spherical Tungsten Carbide WC Powder
Product specifications: 15-45μm, 15-53μm, 45-75μm, 45-105μm, 75-150μm. (Various granularities can be customized according to customer requirements)
Powder characteristics: controllable total carbon content, uniform W2C and WC two-phase structure, high microhardness (HV0.1≥2700), high purity (≥99.9%), low oxygen (≤100ppm), high sphericity (≥98 %), smooth surface, no satellite balls, uniform particle size distribution, excellent flow properties (≤6.0s/50g), high bulk density (≥9.5g/cm3) and tap density (≥10.5g/cm3) .
Applicable processes: supersonic flame spraying (HVOF/HVAF), plasma spraying (APS), plasma surfacing (PTA), laser direct deposition (DLD), laser cladding (LC) and other processes.
Powder application: Cast tungsten carbide has a dual-phase structure of WC and W2C, which has the characteristics of high strength, high hardness, and excellent high temperature performance. Radio frequency plasma spheroidizing cast tungsten carbide powder has the characteristics of high sphericity, good fluidity, high purity, and full density inside the particles. It is widely used in mechanical processing, petroleum exploration, surface engineering and other fields.
Composition (percentage by mass) of Tungsten Carbide Powder WC Powder:
Storage Condition of spherical tungsten carbide WC Powder:
Damp reunion will affect spherical tungsten carbide WC powder dispersion performance and using effects, therefore,spherical tungsten carbide WC Powder should be sealed in vacuum packing and stored in cool and dry room, the spherical tungsten carbide WC Powder can not be exposure to air. In addition, the spherical tungsten carbide powder should be avoided under stress.
Packing & Shipping of spherical tungsten carbide Powder WC:
We have many different kinds of packing which depends on the spherical tungsten carbide WC Powder quantity.
spherical tungsten carbide WC Powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
spherical tungsten carbide WC Powder shipping:could be shipped out by sea , by air, by express as soon as possible once payment receipt.
3D Printing Alloy Spherical Casting Tungsten Carbide WC Powder CAS 12070-12-1 WC Powder Properties |
Other Names | Casting Tungsten Carbide Powder CAS 12070-12-1 WC Powder |
CAS No. | N/A |
Compound Formula | WC |
Molecular Weight | N/A |
Appearance | Gray metallic solid in various forms (ingot, tubing, pieces, powder) |
Melting Point | N/A |
Solubility in water | N/A |
Density | NA |
Purity | N/A |
Particle Size | 0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm |
Boling point | N/A |
Specific Heat | N/A |
Thermal Conductivity | N/A |
Thermal Expansion | N/A |
Young’s Modulus | N/A |
Exact Mass | N/A |
Monoisotopic Mass | N/A |
| |
| |
3D Printing Alloy Spherical Tungsten Carbide WC Powder Health & Safety Information |
Safety Warning | N/A |
Hazard Statements | N/A |
Flashing point | N/A |
Hazard Codes | N/A |
Risk Codes | N/A |
Safety Statements | N/A |
RTECS Number | N/A |
Transport Information | N/A |
WGK Germany | N/A |
About High Purity Powder Based 3D Printing W Powder Spherical Tungsten Powder 3D Metal Powder:Features of Spherical tungsten powder:The product has uniform particles, high activity and large specific surface area, and the oxygen…
About High Purity Powder Based 3D Printing W Powder Spherical Tungsten Powder 3D Metal Powder:
Features of Spherical tungsten powder:
The product has uniform particles, high activity and large specific surface area, and the oxygen content of the powder can be controlled below 1% after passivation treatment.
Spherical tungsten powder MF: W
Spherical tungsten powder Color: gray black
Spherical tungsten powder Purity: 99.9%
Spherical tungsten powder CAS: 7440-33-7
Spherical tungsten powder Polymorphs: spherical
Spherical tungsten powder particle size: 5-25μm,15-45μm
Key Features of spherical tungsten powder
Low oxygen content (< 250 ppm)
High sphericity and spherical degree (> 95%)
High liquidity, no satellite or agglomerates ball
Induced Plasma Process of spherical tungsten powder 3D metal powder:
Unique induction plasma process can be more than 20 kinds of metal and ceramic materials into spherical powder, including tungsten, molybdenum, tantalum, niobium.
Composition (percentage by mass) of Spherical Tungsten Powder:
Application of Spherical tungsten powder:
1 It is widely used in large products such as high specific gravity alloys, alloy steels, drill bits, and top hammers;
2. High-activity nano-tungsten powder can be used as an additive for raw material powder of high-performance high-density alloy (addition amount is from 10% to 20%) and a raw material additive for preparing W strips and W wires, and can also be used as raw material for high-performance alloy tungsten powder. Can significantly improve alloy properties, while reducing sintering temperature and sintering time, saving production costs;
3 The nano-tungsten powder can be used as the raw material of nano-WC to prepare nano-crystalline cemented carbide. Due to the special pore structure of this nano-tungsten powder, it can be used as the raw material of tungsten powder for the W-Mn method of ceramic metallization coating.
Storage Condition of spherical tungsten powder :
Damp reunion will affect W powder dispersion performance and using effects, therefore, spherical tungsten powder should be sealed in vacuum packing and stored in cool and dry room, the spherical tungsten powder can not be exposure to air. In addition, the W powder should be avoided under stress.
Packing & Shipping of spherical tungsten powder:
We have many different kinds of packing which depends on the spherical tungsten powder quantity.
Spherical tungsten powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Spherical tungsten powder shipping:could be shipped out by sea , by air, by express?as soon as possible once payment receipt.
Tqhp Nano Technology Co. Ltd. (Tqhp) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boron powder, nitride powder, graphite powder, zinc sulfide, 3D printing powder, etc.
If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: [email protected]
3D Printing Alloy Spherical Tungsten Powder Properties |
Other Names Tungsten |
CAS No. | N/A |
Compound Formula | W |
Molecular Weight | N/A |
Appearance | Gray metallic solid in various forms (ingot, tubing, pieces, powder) |
Melting Point | N/A |
Solubility in water | N/A |
Density | NA |
Purity | N/A |
Particle Size | 0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm |
Boling point | N/A |
Specific Heat | N/A |
Thermal Conductivity | N/A |
Thermal Expansion | N/A |
Young’s Modulus | N/A |
Exact Mass | N/A |
Monoisotopic Mass | N/A |
| |
| |
3D Printing Alloy Spherical Tungsten Powder Health & Safety Information |
Safety Warning | N/A |
Hazard Statements | N/A |
Flashing point | N/A |
Hazard Codes | N/A |
Risk Codes | N/A |
Safety Statements | N/A |
RTECS Number | N/A |
Transport Information | N/A |
WGK Germany | N/A |
About 3D Printing Alloy Spherical Tungsten Molybdenum Alloy W-Mo Powder:Alloys of molybdenum and metals play an important role in weapons manufacturing, as well as in cutting-edge fields such as missiles and rockets. In…
About 3D Printing Alloy Spherical Tungsten Molybdenum Alloy W-Mo Powder:
Alloys of molybdenum and metals play an important role in weapons manufacturing, as well as in cutting-edge fields such as missiles and rockets. In addition, tungsten wire is used to make filament, heating element of high temperature electric furnace. Molybdenum metal can be easily processed into wire, strip, sheet, rod, etc., and is widely used in the electronics industry. Molybdenum wire is used as a small hook to support the heating wire in the light bulb, the grid of the electron tube, etc. Molybdenum and tungsten boats (for vacuum coating)
Product name: spherical tungsten-molybdenum alloy powder
Product specifications: 5-25μm, 15-45μm, 15-53μm, 45-75μm, 45-105μm, 75-150μm. (Various granularities can be customized according to customer requirements)
Powder characteristics: Adjustable and controllable content of tungsten and molybdenum, high purity (≥99.9%), low oxygen (≤300ppm), high sphericity (≥98%), smooth surface, no satellite spheres, uniform particle size distribution, excellent Flowability (≤10.0s/50g) and high bulk density (≥6.0g/cm3) and tap density (≥7.0g/cm3).
Applicable processes: laser/electron beam additive manufacturing (SLM/EBM), laser direct deposition (DLD), powder hot isostatic pressing (HIP), metal injection molding (MIM), powder metallurgy (PM), laser cladding ( LC) and other processes.
Powder application: Tungsten-molybdenum alloy has good high-temperature strength, similar properties to tungsten but smaller specific gravity than tungsten. It can be used as high-temperature components in rockets, missiles, filaments, parts of electronic tubes and other high-temperature materials under corresponding high-temperature conditions. It is widely used In the national defense industry, medical equipment, nuclear industry and other fields.
Composition (percentage by mass):
Storage Condition of Spherical Tungsten Molybdenum Alloy Powder:
Damp reunion will affect Spherical Tungsten Molybdenum Alloy powder dispersion performance and using effects, therefore,Spherical Tungsten Molybdenum Alloy Powder should be sealed in vacuum packing and stored in cool and dry room, the Spherical Tungsten Molybdenum Alloy Powder can not be exposure to air. In addition, the Spherical Tungsten Molybdenum Alloy powder should be avoided under stress.
Packing & Shipping of Spherical Tungsten Molybdenum Alloy Powder:
We have many different kinds of packing which depends on the Spherical Tungsten Molybdenum Alloy Powder quantity.
Spherical Tungsten Molybdenum Alloy Powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Spherical Tungsten Molybdenum Alloy Powder shipping:could be shipped out by sea , by air, by express as soon as possible once payment receipt.
3D Printing Alloy Spherical Tungsten Molybdenum Alloy W-Mo Powder Properties |
Other Names Tungsten Molybdenum Alloy W-Mo Powder |
CAS No. | N/A |
Compound Formula | W-Mo |
Molecular Weight | N/A |
Appearance | Gray metallic solid in various forms (ingot, tubing, pieces, powder) |
Melting Point | N/A |
Solubility in water | N/A |
Density | NA |
Purity | N/A |
Particle Size | 0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm |
Boling point | N/A |
Specific Heat | N/A |
Thermal Conductivity | N/A |
Thermal Expansion | N/A |
Young’s Modulus | N/A |
Exact Mass | N/A |
Monoisotopic Mass | N/A |
| |
| |
3D Printing Alloy Spherical Tungsten Molybdenum Alloy W-Mo Powder Health & Safety Information |
Safety Warning | N/A |
Hazard Statements | N/A |
Flashing point | N/A |
Hazard Codes | N/A |
Risk Codes | N/A |
Safety Statements | N/A |
RTECS Number | N/A |
Transport Information | N/A |
WGK Germany | N/A |