The backfilling of the bathroom is a crucial part of any renovation. Backfilling is an essential part of bathroom renovations. It is used to stop leakage and improve the thermal insulation. In selecting bathroom materials, you should consider several factors depending on your specific situation. For example, take into account the performance and cost of backfill material as well the environmental protection.
There are five types of backfills available on the market: slags in general, slags with carbon, ceramics and foam cement. We are confused about the different backfills.
Backfilling with slag can be cheaper, but because it is heavy and can cause the slab to crack easily, this could lead to leakage of water.
It is cheaper to use overhead backfill because you do need less material.
Since a few decades, foamed concrete has been popular for filling bathroom backfill. But does foamed cemented have its downsides?
For your information, here are five bathroom backfill materials with their advantages and disadvantages and some selection advice:
Building debris backfill
Advantages:
The advantages of slag backfill are its lower cost, ease of construction and certain thermal insulation properties.
Disadvantages:
Backfilling with construction waste will damage the waterproof layer and the pipeline due to its sharp edges.
Recommendation:
Has been eliminated. Do not recommend this method. The budget of the family is too small to use construction debris backfill. To protect the waterproofing of the ground, first use fine sand, then red bricks, to protect the pipeline. The backfill should be compacted in layers. Finally, mud-mortar to level the surface will provide good secondary drainage.
Carbon Dregs Backfill
Advantages:
Carbon slag as a backfill has many advantages, including its low cost, ease of construction, porous and lightweight structure, and excellent moisture absorption.
Disadvantages:
The disadvantages of carbon dregs are that they are not stable enough. They can easily deform, fall off and be relatively flimsy.
Recommendation:
In recent years, carbon slag has rarely been chosen as a backfill in bathrooms due to its negatives.
Ceramic Backfill
Advantages:
Ceramic backfill has many advantages including high strength, good insulation and corrosion resistance.
Disadvantages:
Before pouring in the ceramic, use lightweight bricks for layered partition. Divide the bathroom into several squares. Fill the squares with the ceramic, then place a reinforcing mesh with a diameter around one centimetre. Finally, level with cement mortar.
Suggestion: Look at your family’s budget and take it into consideration.
Overhead Backfill
Advantages:
Backfilling with overhead backfill has many advantages, including its simplicity, stability, inability to deform and easy fall-off.
Disadvantages:
Construction takes a long time, and labour is expensive compared to other methods of backfilling. The bottom drain is located overhead and will make the sound of water more noticeable.
It is important to carefully consider whether the disadvantages of the situation outweigh any advantages.
Foamed Cement
Backfill
Advantages:
Foamed cement is an increasingly popular backfill. It is also safe and eco-friendly. The raw material for cement foaming agents, plant-based fat acid, is both safe and environmentally friendly.
Benefits include good heat conservation, light weight, high strength and corrosion resistance. The backfilling process is greatly accelerated and reduced in cost, as it can be filled seamlessly and with very little effort.
Foamed cement can be mixed with cement and used to fix the pipe. If not, the pipe will easily float.
Disadvantages:
It is best to find a builder that has worked with foam cement or look up construction tutorials.
Suggestion:
The majority of people backfill their bathrooms with foamed-cement. Its advantages are still quite obvious.
The five types of backfill for bathrooms all have advantages and disadvantages. In order to choose the right material for your bathroom backfill, you should consider a number of factors. You must always consider the environment when choosing bathroom backfill materials to ensure the decor of the bathroom is safe and sustainable.
Titanium Aluminum Nitride Ti4AlN3 Powder has high strength and elastic modulus, high thermal conductivity and electrical conductivity, and good workability.Technical Parameter of Titanium Aluminum Nitride Ti4AlN3 Powder :Product NameMFPurityParticle SizeMolecular WeightMelting PointColorTitanium Aluminum NitrideTi4AlN399%200mesh, 400meshN/AN/AGray…
Titanium Aluminum Nitride Ti4AlN3 Powder has high strength and elastic modulus, high thermal conductivity and electrical conductivity, and good workability.
Technical Parameter of Titanium Aluminum Nitride Ti4AlN3 Powder :
| Product Name | MF | Purity | Particle Size | Molecular Weight | Melting Point | Color |
| Titanium Aluminum Nitride | Ti4AlN3 | 99% | 200mesh,
400mesh | N/A | N/A | Gray Black |
How is Titanium Aluminum Nitride Ti4AlN3 Powder Produced?
1. Weighing niobium powder, aluminum powder and toner, and then ball-milling mixed powder;
2. The mixed powder into the graphite boat, and then into the reactor, and filled with inert gas, ignition, self-spreading reaction, cooling after crushing, sifting, drying to get Ti4AlN3 ceramic powder. The method has the advantages of fast reaction speed, short synthesis time, low energy consumption, low cost and high production efficiency, and the obtained Ti4AlN3 ceramic powder has high purity. The Ti4AlN3 ceramic powder obtained by the invention can be used in aviation, aerospace, electronic industry and nuclear industry, etc.
Applications of Titanium Aluminum Nitride Ti4AlN3 Powder:
MAX has been widely used in nanometer adsorption, biosensors, ion screening, catalysis, lithium-ion batteries, supercapacitors, lubrication and many other fields.Ti4AlN3 powder can be used for energy storage, catalysis, analytical chemistry, mechanics, adsorption, biology, microelectronics, sensors, etc.
Storage Condition of Titanium Aluminum Nitride Ti4AlN3 Powder :
The damp reunion will affect Ti4AlN3 powder dispersion performance and using effects, therefore, Titanium Aluminum Nitride Ti4AlN3 Powder should be sealed in vacuum packing and stored in the cool and dry room, titanium aluminum nitride can not be exposure to air. In addition, the Ti4AlN3 powder should be avoided under stress.
Packing & Shipping of Titanium Aluminum Nitride Ti4AlN3 Powder :
We have many different kinds of packing which depend on the Titanium Aluminum Nitride Ti4AlN3 Powder quantity.
Titanium Aluminum Nitride Ti4AlN3 Powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Titanium Aluminum Nitride Ti4AlN3 Powder shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.
Titanium Aluminum Nitride Powder Properties |
| Other Names | Titanium carbide/Aluminum nitride MXene,
Advanced Max/Mxene Powder, Ti:Al:N, Ti4AlN3 powder |
| CAS No. | N/A |
| Compound Formula | Ti4AlN3 |
| Molecular Weight | 260.449 |
| Appearance | Gray to Black Powder |
| Melting Point | N/A |
| Boiling Point | N/A |
| Density | N/A |
| Solubility in H2O | N/A |
| Thermal Expansion | N/A |
| | |
| | |
Titanium Aluminum Nitride Powder Health & Safety Information |
| Signal Word | N/A |
| Hazard Statements | N/A |
| Hazard Codes | N/A |
| Risk Codes | N/A |
| Safety Statements | N/A |
| Transport Information | N/A |
About Pre-alloyed Iron Copper FeCu Powder:Copper-iron alloy is also a kind of alloy. Fe-Cu powder has excellent electrical conductivity, thermal conductivity, ductility and corrosion resistance, which combines the advantages of copper and…
About Pre-alloyed Iron Copper FeCu Powder:
Copper-iron alloy is also a kind of alloy. Fe-Cu powder has excellent electrical conductivity, thermal conductivity, ductility and corrosion resistance, which combines the advantages of copper and iron. An alloy in which copper is the main element and iron is added. Ferroalloy also has uniform composition, reasonable structure, smooth surface, easy storage and handling, as a middle alloy, added to the copper casting, has good deoxidization, fluidity and other characteristics. A small number of rare earth can be added to refine a copper-iron alloy, and copper and iron melt at a similar temperature of about 1,200 degrees, making them perfectly compatible.
Many pure metals have unique properties that we need in some applications. For example in the case of copper, this metal provides excellent corrosion resistance in brine environments. It also has great electrical and thermal conductivity, as it is often used for electronic and electrical wiring. Other properties of copper include ductility, ductility, and softness.
However, pure metals themselves also have negative properties, which will ruin the application. In the case of copper, the metal is very weak. Although work hardening can be used to strengthen it, another way to make it stronger is to add other metals, such as iron.
Like copper, iron is malleable and malleable. It also has good electrical conductivity and tensile strength because it can be stretched without breaking. However, iron is corrosive because it oxidizes to form rust in the presence of water and oxygen.
Sometimes the addition of iron to copper alloys has a positive effect. Some of the main benefits of adding iron to the copper alloy are increased tensile strength and corrosion resistance without compromising the original electrical conductivity of the copper alloy.
Copper – iron alloy: Copper – iron (CuFe) master alloy has high tensile strength, corrosion resistance and high thermal and electrical conductivity. This master alloy is used as a grain refiner when added to other copper alloys such as aluminum bronze and brass. It usually helps to improve the mechanical properties of low alloy copper.
A low copper alloy can become a high copper alloy when iron and other metals are added. They are extremely strong and have a conductivity of 75 to 90 percent. Tqhp is a trusted global Pre-alloyed Iron Copper FeCu Powder supplier. Feel free to send an inquiry about the latest price of Iron Copper FeCu at any time.
Brief Introduction of Iron Copper FeCu Powder:
Product Name: FeCu powder, iron copper alloy powder
Hardness of FeCu powder: 102HRB
Tensile strength of FeCu powder: 1534Mpa
TDS of Iron Copper FeCu Powder:
Theoretical Densisty of hydrogen: 7.97g/cm3
Hydrogen Loss of FeCu powder: less than 0.65%
Apparent Density of FeCu powder: 0.6-0.8g/cm3
Tap Densisty of FeCu powder: 0.9-1.1g.cm3
Particle size of FeCu powder: D50=10.0-18.3
Features of Iron Copper FeCu Powder:
Preparation Large surface area, high activity, low sintering temperature, high density, high hardness sintered (maximum 102HRB) good sintering stability, bending strength up to 1534 Mpa, good flowability.
How is Pre-alloyed Iron Copper FeCu Powder produced?
When the content of copper powder is 7.44 % by mass and the sintering temperature is higher than the melting point of copper, the compaction expands the maximum. When (Fe-3.44 mass %Cu) pre-alloyed iron powder is mixed with copper powder, the maximum expansion rate of the sample is lower than that of the former when the addition amount of copper powder is 4.00 mass %. However, the compaction made of (Fe-7.18 %Cu) iron alloy powder and copper powder only shrinks when the copper powder is added. The penetration of liquid copper into the interstitial space between solid grains was observed in all sintered billets. The expansion behavior of iron-copper compaction with the same copper powder content changes with the increase of copper content in the initial iron powder.
Applications of Pre-alloyed Iron Copper FeCu Powder:
Copper-iron intermediate alloy is a grain refinement agent for brass alloys and aluminum bronze. It can also be used to improve the mechanical properties of low alloy copper and corrosion resistance of copper-nickel alloys.
In FeCu alloy systems, the actual procedures for the obvious mutual diffusion between these two basic elements are very limited. This work focuses on high-energy ball milling techniques to produce FeCu materials and, in some cases, simultaneously deposit them on thin substrates to suit different applications. This deposition occurs within the same crucible range and is used to produce alloys except without the use of grinding balls. Milling time and speed are two parameters that control the thickness and microstructure of the deposition layer. This two-step process generally allows for many practical applications to improve the mechanical, optical, and thermal properties of the target material by mechanical modification of its surface.
Storage Condition of Iron Copper FeCu Powder:
The damp reunion will affect FeCu powder dispersion performance and using effects, therefore, Iron Copper FeCu Powder should be sealed in vacuum packing and stored in cool and dry room, Iron Copper FeCu Powder can not be exposure to air. In addition, the FeCu powder should be avoided under stress.
Packing & Shipping of Iron Copper FeCu Powder:
We have many different kinds of packing which depends on the Iron Copper FeCu Powder quantity.
Iron Copper FeCu Powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Iron Copper FeCu Powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.
Iron Copper Alloy Powder Properties |
| Other Names | FeCu, CuFe, Fe:Cu, Iron Copper, Fe-Cu Powder |
| CAS No. | N/A |
| Compound Formula | FeCu |
| Molecular Weight | N/A |
| Appearance | Gray to Black Powder |
| Melting Point | N/A |
| Boiling Point | N/A |
| Density | 8.9 g/cm3 |
| Solubility in H2O | N/A |
| Monoisotopic Mass | 118.865 g/mol |
| | |
| | |
Iron Copper Alloy Powder Health & Safety Information |
| Signal Word | N/A |
| Hazard Statements | N/A |
| Hazard Codes | N/A |
| Risk Codes | N/A |
| Safety Statements | N/A |
| Transport Information | N/A |
About Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate:Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate has the characteristics of rich and fine foam, low degreasing power, low irritation to skin and hair, and good biodegradability.Tqhp…
About Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate:
Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate has the characteristics of rich and fine foam, low degreasing power, low irritation to skin and hair, and good biodegradability.
Tqhp is a trusted global Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate. Feel free to send an inquiry to get the latest price of Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate if you would like to buy Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate in bulk.
Product Performance of Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate:
Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate can improve the combability and softness of the hair, and its mild decontamination performance makes the skin comfortable after washing.
Technical Parameter of Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate:
| Product Name | Short Name | Effective substance content | PH | Odor | Appearance |
|---|
| Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate | TEP | NA | 2-4 | Slight characteristic odor | slightly yellow liquid |
Applications of Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate:
Widely applicable to hair care formulations, excellent wetting properties, antistatic properties.
Packing & Shipping of Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate:
We have many different kinds of packing which depend on Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate quantity.
Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate packing: 1kg/bottle, 25kg/barrel, or 200kg/ barrel.
Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.
Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate Properties |
| Other Names | N/A |
| CAS No. | 91995-81-2 |
| Compound Formula | N/A |
| Molecular Weight | N/A |
| Appearance | NA |
| Melting Point | N/A |
| Boiling Point | N/A |
| Density | N/A |
| Solubility in H2O | N/A |
| Exact Mass | N/A |
Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate & Safety Information |
| Signal Word | N/A |
| Hazard Statements | N/A |
| Hazard Codes | N/A |
| Risk Codes | N/A |
| Safety Statements | N/A |
| Transport Information | N/A |
About Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate:Surface:mill, polished, bright, oiled, hair line, brush, mirror, sand blast.Dimension:Metal Alloy 8.92g/cm3 High Purity Polished Copper Plate PropertiesOther NamesCopper PlateCAS No.N/ACompound FormulaCuMolecular WeightN/AAppearanceN/AMelting PointN/ASolubility…
About Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate:
Surface:
mill, polished, bright, oiled, hair line, brush, mirror, sand blast.
Dimension:
Metal Alloy 8.92g/cm3 High Purity Polished Copper Plate Properties |
| Other Names | Copper Plate |
| CAS No. | N/A |
| Compound Formula | Cu |
| Molecular Weight | N/A |
| Appearance | N/A |
| Melting Point | N/A |
| Solubility in water | N/A |
| Density | 8.92g/cm3 |
| Purity | 99.95%, 99.99%, 99.995% |
| Size | customized |
| Boling point | N/A |
| Specific Heat | N/A |
| Thermal Conductivity | N/A |
| Thermal Expansion | N/A |
| Young’s Modulus | N/A |
| Exact Mass | N/A |
| Monoisotopic Mass | N/A |
| | |
| | |
Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate Health & Safety Information |
| Safety Warning | N/A |
| Hazard Statements | N/A |
| Flashing point | N/A |
| Hazard Codes | N/A |
| Risk Codes | N/A |
| Safety Statements | N/A |
| RTECS Number | N/A |
| Transport Information | N/A |
| WGK Germany | N/A |
Product Name: Zinc p-tert-butylbenzoateFormula：C22H26O4ZnCAS NO：4980-54-5Molecular weight：419.83About Zinc P-tert-butylbenzoate:Zinc tert-butylbenzoate is a light yellow powder. Chemical molecular formula: C22H26O4ZN, CAS number: 4980-54-5, molecular weight: 419.83, main use: Stabilizer mainly used for polyvinyl chloride,…
Product Name: Zinc p-tert-butylbenzoate
Formula：C22H26O4Zn
CAS NO：4980-54-5
Molecular weight：419.83
About Zinc P-tert-butylbenzoate:
Zinc tert-butylbenzoate is a light yellow powder. Chemical molecular formula: C22H26O4ZN, CAS number: 4980-54-5, molecular weight: 419.83, main use: Stabilizer mainly used for polyvinyl chloride, is a stabilizer for fine PVC soft transparent article. Feel free to send an inquiry to get the latest price if you would like to buy Zinc P-tert-butylbenzoate in bulk.
Properties of Zinc P-tert-butylbenzoate:
Zinc P-tert-butylbenzoate (CAS 4980-54-5) is a white to light yellow powder.
Technical Data of Zinc P-tert-butylbenzoate:
| Loss on drying | ≤5% |
| zinc content | 14~16% |
| Particle size | （200mesh passing）≥99% |
| Heavy metal | ≤10PPM |
How is Zinc P-tert-butylbenzoate produced?
At present, existing synthesis methods are oxidative synthesis, mainly including no solventless oxidation, nitric oxidation, liquid-phase catalytic oxidation, permanganate oxidation, microwave synthesis method, high-temperature gas-phase oxidation method. These methods are raw materials for t-butyl benzene.
Application of Zinc P-tert-butylbenzoate
Zinc tert-butylbenzoate is a light yellow powder. Chemical molecular formula: C22H26O4ZN, CAS number: 4980-54-5, molecular weight: 419.83, main use: Stabilizer mainly used for polyvinyl chloride, is a stabilizer for fine PVC soft transparent article.
Packing & Shipping of Zinc P-tert-butylbenzoate:
We have many different kinds of packing which depend on the zinc P-tert-butylbenzoate quantity.
Zinc P-tert-butylbenzoate packing: 25kg/barrel, or as your request.
Zinc P-tert-butylbenzoate shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.
Zinc P-tert-butylbenzoate Properties |
| Other Names | p-tert-butylbenzoate, Zinc tert-butylbenzoate |
| CAS No. | 4980-54-5 |
| Compound Formula | C22H26O4Zn |
| Molecular Weight | 419.83 |
| Appearance | white to light yellow powder |
| Melting Point | N/A |
| Solubility in water | N/A |
| Zinc Content | 14-16% |
| Purity | N/A |
| Particle Size | (200mesh passing)≥99% |
| Boling point | N/A |
| Specific Heat | N/A |
| Thermal Conductivity | N/A |
| Thermal Expansion | N/A |
| Young’s Modulus | N/A |
| Exact Mass | N/A |
| Monoisotopic Mass | N/A |
| | |
| | |
Zinc P-tert-butylbenzoate Health & Safety Information |
| Safety Warning | N/A |
| Hazard Statements | N/A |
| Flashing point | N/A |
| Hazard Codes | N/A |
| Risk Codes | N/A |
| Safety Statements | N/A |
| RTECS Number | N/A |
| Transport Information | N/A |
| WGK Germany | N/A |
About Sodium Salt of Polynaphthalene Sulphonic Acid:Sodium Salt of Polynaphthalene Sulphonic Acid has the characteristics of rich and fine foam, low degreasing power, low irritation to skin and hair, and good biodegradability.Tqhp…
About Sodium Salt of Polynaphthalene Sulphonic Acid:
Sodium Salt of Polynaphthalene Sulphonic Acid has the characteristics of rich and fine foam, low degreasing power, low irritation to skin and hair, and good biodegradability.
Tqhp is a trusted global Sodium Salt of Polynaphthalene Sulphonic Acid. Feel free to send an inquiry to get the latest price of Sodium Salt of Polynaphthalene Sulphonic Acid if you would like to buy Sodium Salt of Polynaphthalene Sulphonic Acid in bulk.
Product Performance of Sodium Salt of Polynaphthalene Sulphonic Acid:
Disodium Laureth Sulfosuccinate can improve the combability and softness of the hair, and its mild decontamination performance makes the skin comfortable after washing.
Technical Parameter of Sodium Salt of Polynaphthalene Sulphonic Acid:
| Product Name | Short Name | Diffusion power | PH | Odor | Appearance |
|---|
| Sodium Salt of Polynaphthalene Sulphonic Acid | NA | 95% | 7-9 | Slight characteristic odor | light yellow powder |
Applications of Sodium Salt of Polynaphthalene Sulphonic Acid:
In the printing and dyeing industry, it is mainly used for vat dye suspension pad dyeing, leuco acid dyeing, dispersing and soluble vat dyes, and also for dyeing silk and wool interwoven fabrics. It is also used as a diffusion aid for dispersion and lake manufacturing; in the building materials industry, it is used as a cement water reducing early strength agent. After the cement is shaken, the cement has a good dispersion effect, increases the strength of the cement, and improves the tensile, impermeability, and permeability of the concrete. Both frost resistance and compressive elastic modulus have been improved, and have no rust effect on steel bars; in agriculture, it can be widely used in wettable agricultural preparations with good dispersion and solubilization; electroplating industry, adding this product to color electroplating can make The pigment is evenly dispersed, which can significantly improve the brightness of the electroplated surface; in the production process of the rubber (latex) industry, the dispersion of substances such as sulfur accelerators, antioxidants, zinc oxide fillers (such as barium sulfate, calcium carbonate), etc., can improve Dispersion effect, shorten the time of ball milling.
Packing & Shipping of Sodium Salt of Polynaphthalene Sulphonic Acid:
We have many different kinds of packing which depend on Sodium Salt of Polynaphthalene Sulphonic Acid quantity.
Sodium Salt of Polynaphthalene Sulphonic Acid packing: 1kg/bottle, 25kg/barrel, or 200kg/ barrel.
Sodium Salt of Polynaphthalene Sulphonic Acid shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.
Sodium Salt of Polynaphthalene Sulphonic Acid Properties |
| Other Names | N/A |
| CAS No. | 36290-04-7 |
| Compound Formula | CH2(C10H6SO3Na)2 |
| Molecular Weight | N/A |
| Appearance | NA |
| Melting Point | N/A |
| Boiling Point | N/A |
| Density | N/A |
| Solubility in H2O | N/A |
| Exact Mass | N/A |
Sodium Salt of Polynaphthalene Sulphonic Acid Health & Safety Information |
| Signal Word | N/A |
| Hazard Statements | N/A |
| Hazard Codes | N/A |
| Risk Codes | N/A |
| Safety Statements | N/A |
| Transport Information | N/A |
About Sodium diisobutylnaphthalene sulphonate:Sodium diisobutylnaphthalene sulphonate has the characteristics of rich and fine foam, low degreasing power, low irritation to skin and hair, and good biodegradability.Tqhp is a trusted global Sodium diisobutylnaphthalene…
About Sodium diisobutylnaphthalene sulphonate:
Sodium diisobutylnaphthalene sulphonate has the characteristics of rich and fine foam, low degreasing power, low irritation to skin and hair, and good biodegradability.
Tqhp is a trusted global Sodium diisobutylnaphthalene sulphonate. Feel free to send an inquiry to get the latest price of Sodium diisobutylnaphthalene sulphonate if you would like to buy Sodium diisobutylnaphthalene sulphonate in bulk.
Product Performance of Sodium diisobutylnaphthalene sulphonate:
Sodium diisobutylnaphthalene sulphonate can improve the combability and softness of the hair, and its mild decontamination performance makes the skin comfortable after washing.
Technical Parameter of Sodium diisobutylnaphthalene sulphonate:
| Product Name | Short Name | Effective substance content | PH | Odor | Appearance |
|---|
| Sodium diisobutylnaphthalene sulphonate | NA | 60-65% | 7-9 | Slight characteristic odor | beige powder |
Applications of Sodium diisobutylnaphthalene sulphonate:
Widely used in various processes of textile printing and dyeing, mainly used as penetrant and wetting agent, emulsifier and softener in rubber industry, wetting agent in paper industry, wetting agent in lake industry and synergist for agricultural preparations; Coating dispersant and resin remover, etc. It is best to prepare the powder to be prepared as an aqueous solution for later use. The powder is easily damp and can be dissolved even if it is damp. It does not affect the application performance. After taking it, you should still pay attention to the sealing of the packaging container to ensure the accuracy of weighing. In the paper industry, it is mainly used as wet felt, new felt or parked dry felt. It is difficult to absorb water. If you use a powder solution, (1-2%) is slowly poured on the felt, which can accelerate the wetting.
Packing & Shipping of Sodium diisobutylnaphthalene sulphonate:
We have many different kinds of packing which depend on Sodium diisobutylnaphthalene sulphonate quantity.
Sodium diisobutylnaphthalene sulphonate packing: 1kg/bottle, 25kg/barrel, or 200kg/ barrel.
Sodium diisobutylnaphthalene sulphonate shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.
Sodium Diisobutylnaphthalene Sulphonate Properties |
| Other Names | N/A |
| CAS No. | 27213-90-7 |
| Compound Formula | C18H23O3S |
| Molecular Weight | N/A |
| Appearance | NA |
| Melting Point | N/A |
| Boiling Point | N/A |
| Density | N/A |
| Solubility in H2O | N/A |
| Exact Mass | N/A |
Sodium Diisobutylnaphthalene Sulphonate Health & Safety Information |
| Signal Word | N/A |
| Hazard Statements | N/A |
| Hazard Codes | N/A |
| Risk Codes | N/A |
| Safety Statements | N/A |
| Transport Information | N/A |
About Calcium Stearate Emulsion:Calcium Stearate Emulsion is an organic compound, molecular formula C36H70CAO4, white powder is insoluble in water, which can be used as waterproof, lubricants, and plastic auxiliary tools. Calcium stearate is…
About Calcium Stearate Emulsion:
Calcium Stearate Emulsion is an organic compound, molecular formula C36H70CAO4, white powder is insoluble in water, which can be used as waterproof, lubricants, and plastic auxiliary tools. Calcium stearate is calcium carboxylate and is divided into calcium soap. It is some lubricants, surfactants, and components of many foods. This is a white waxy force. The calcium stearate emulsion is a stabilizer and lubricant of polychloroacetic acid, but the stable effect is poor, long-term thermally stable effect is good, and non-toxic food packaging, medical device and other soft film vessels. In polyethylene, polypropylene as a halogen absorber, the catalyst in the resin can eliminate the adverse effects of resin color and stability. It can also be widely used as a lubricant of polyolefin fibers and mold plastic, or a phenolic, amino group such as a phenolic, amino group, and a polyester reinforced plastic moisturizing and release agent, a water repeater of grease, and a water repeater of textiles. Paint flat light, etc. Feel free to send an inquiry to get the latest price if you would like to buy Calcium Stearate Emulsion in bulk.
Product Performance of Calcium Stearate Emulsion:
Calcium stearate liquid refers to water-based calcium stearate, also known as calcium stearate emulsion, which is widely used in industrial fields. Calcium stearate emulsion has ultra-fine, lubricating and delicate feeling, good thermal denaturation resistance, and good transparency. Good defoaming, excellent dispersibility, anti-settling performance, sandability and yellowing resistance.
Technical Parameter of Calcium Stearate Emulsion:
| Product Name | MF | Purity | PH | Partical Size | Density | Color |
| Calcium Stearate Emulsion | Ca(C17H35COO)2 | 50% | 9-12 | ≤ 10um | 0.8-1.0 g/cm3 | White |
How is Calcium Stearate Emulsion produced?
Preparation of calcium stearate emulsion by saponification synthesis method
Add the CaCl solution and the NaOH solution to the reactor according to the stoichiometric ratio, then add the dispersant, emulsifier A, emulsifying aid and CMC under agitation, and then mix evenly to obtain an emulsion; add stearic acid and catalyst to the emulsion, and keep the temperature constant Stir to obtain a mixed solution; stearic acid and calcium hydroxide react to form calcium stearate, which is uniformly dispersed in the emulsion. Finally, n-octanol and modified polyvinyl alcohol aqueous solution (mass percentage concentration is 10%) are added and stirred to react 0.5- 20s, quickly cooled to room temperature, high-speed shear dispersion for 10-30 minutes to obtain calcium stearate emulsion, and its solid content, viscosity, dispersibility, etc. were analyzed and determined.
Applications of Calcium Stearate Emulsion:
Calcium stearate is mainly used as an acid scavenger, release agent and lubricant in the plastic industry, used in building waterproofing, and used as an anti-caking additive in medicines and cosmetics, calcium stearate lubricant.
1. Calcium stearate emulsion is a stabilizer and lubricant of polychloroacetic acid, but its stabilizing effect is poor, and the long-term thermal stabilization effect is still good. It can be used as non-toxic food packaging, medical equipment and other soft film utensils.
2. Calcium stearate emulsion is used as a halogen absorbent in polyethylene and polypropylene, which can eliminate the adverse effect of the residual catalyst in the resin on the color and stability of the resin.
3.Calcium stearate emulsion can also be widely used as a lubricant for polyolefin fibers and molded products.
4. Calcium stearate emulsion can be used as a lubricant and release agent for phenolic, amino and other thermosetting plastics, polyester reinforced plastics, and a thickening agent for grease.
5. Calcium stearate emulsion is used as a waterproofing agent for textiles and a smoothing agent for paints.
Packing & Shipping of Calcium Stearate Emulsion:
We have many different kinds of packing which depends on calcium stearate emulsion quantity.
Calcium stearate emulsion packing: 1kg/bottle, 25kg/barrel, or 200kg/ barrel.
Calcium stearate emulsion shipping: could be shipped out by sea , by air, by express as soon as possible once payment receipt.
Calcium Stearate Emulsion Properties |
| Other Names | N/A |
| CAS No. | N/a |
| Compound Formula | Ca(C17H35COO)2 |
| Molecular Weight | N/A |
| Appearance | White Emulsion |
| Melting Point | 150-155℃ |
| Boiling Point | N/A |
| Density | 0.8-1.0 g/cm3 |
| Solubility in H2O | N/A |
| Exact Mass | N/A |
Calcium Stearate Emulsion Health & Safety Information |
| Signal Word | N/A |
| Hazard Statements | N/A |
| Hazard Codes | N/A |
| Risk Codes | N/A |
| Safety Statements | N/A |
| Transport Information | N/A |
About Sodium diethylhexyl sulfosuccinate:Sodium diethylhexyl sulfosuccinate has the characteristics of rich and fine foam, low degreasing power, low irritation to skin and hair, and good biodegradability.Tqhp is a trusted global Sodium diethylhexyl…
About Sodium diethylhexyl sulfosuccinate:
Sodium diethylhexyl sulfosuccinate has the characteristics of rich and fine foam, low degreasing power, low irritation to skin and hair, and good biodegradability.
Tqhp is a trusted global Sodium diethylhexyl sulfosuccinate. Feel free to send an inquiry to get the latest price of Sodium diethylhexyl sulfosuccinate if you would like to buy Sodium diethylhexyl sulfosuccinate in bulk.
Product Performance of Sodium diethylhexyl sulfosuccinate:
Sodium diethylhexyl sulfosuccinate can improve the combability and softness of the hair, and its mild decontamination performance makes the skin comfortable after washing.
Technical Parameter of Sodium diethylhexyl sulfosuccinate:
| Product Name | Short Name | Effective substance content | PH | Odor | Appearance |
|---|
| Sodium diethylhexyl sulfosuccinate | NA | 45% | 5-7 | Slight characteristic odor | Colorless to light yellow liquid |
Applications of Sodium diethylhexyl sulfosuccinate:
The penetration is fast and uniform, with good wetting, penetration, emulsification and foaming properties. Not resistant to strong acids, strong bases, high temperatures, heavy metal salts and reducing agents. It is used to treat cotton, linen, viscose and their blended products. The treated fabric can be bleached or dyed directly without scouring, which can improve dyeing defects caused by dead cotton, and the printed and dyed fabric feels softer and fuller. When scouring and bleaching the green body, the slurry is best to be decontaminated first to ensure the penetration effect.
Packing & Shipping of Sodium diethylhexyl sulfosuccinate:
We have many different kinds of packing which depend on Sodium diethylhexyl sulfosuccinate quantity.
Sodium diethylhexyl sulfosuccinate packing: 1kg/bottle, 25kg/barrel, or 200kg/ barrel.
Sodium diethylhexyl sulfosuccinate shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.
Sodium Diethylhexyl Sulfosuccinate Properties |
| Other Names | N/A |
| CAS No. | 1639-66-3 |
| Compound Formula | C20H36O7SNa |
| Molecular Weight | N/A |
| Appearance | NA |
| Melting Point | N/A |
| Boiling Point | N/A |
| Density | N/A |
| Solubility in H2O | N/A |
| Exact Mass | N/A |
Sodium Diethylhexyl Sulfosuccinate Health & Safety Information |
| Signal Word | N/A |
| Hazard Statements | N/A |
| Hazard Codes | N/A |
| Risk Codes | N/A |
| Safety Statements | N/A |
| Transport Information | N/A |