What is it? Aluminum Boride ? Aluminum Boride, a binary compound that is made of aluminum and boron, is known as aluminum boride. AlB2 is its chemical formula. It is a reddish…
What is it?
Aluminum Boride
?
Aluminum Boride, a binary compound that is made of aluminum and boron, is known as aluminum boride. AlB2 is its chemical formula. It is a reddish solid at normal temperatures and pressures. When heated, it loses some of its surface luster. It is stable when it is heated in cold dilute acid. However, it will break down in hot hydrochloric or nitric acid. The boron and aluminum fine powders are heated and then react after mixing.
Aluminum Boride: The Characteristics
Aluminum Boride is a monoclinic, black, glossy, monoclinic crystal that has a specific weight of 2.55 (18degC). It’s insoluble in water and acid and can also be decomposed in hot acid. Aluminum Boride is a dangerous substance as it reacts with hydrogen and acids to produce toxic gases. Aluminum boride reacts with hydrochloric to release borane or aluminum chloride. Structurally, the B atoms form graphite sheets with Al between them. This is very similar in structure to magnesium diboride. AlB2 is a single crystal that exhibits metallic conductivity with an axis parallel the hexagonal plane.
Aluminum Diboride AlB2 Powder Properties
|
Other Titles
|
aluminium boride, aluminum diboride, AIB2
|
No.
|
12041-50-8
|
Combination Formula
|
AlB2
|
Molecular Weight
|
48.604 g/mol
|
Appearance
|
Copper-red solid
|
Melting Point
|
>920 degC (decomposes)
|
Solubility of in water
|
Insolutable
|
Density
|
3.19 g/cm3
|
Purity
|
>98.5%
|
Particle size
|
5-10um
|
Poisson’s Ratio
|
N/A
|
Specific heat
|
N/A
|
Thermal Conductivity
|
N/A
|
Thermal Expansion
|
N/A
|
Young’s Modulus
|
N/A
|
Exact Mass
|
49.000149
|
Monoisotopic
|
49.000149
|
Aluminum Diboride AlB2 Powder CAS 12041-50-8
How to prepare aluminum iboride
AlB12 powder was produced by powder metallurgy using amorphous Boron powder and aluminum powder. To determine the phase composition, relative contents, and microscopic structure of the product, Xray diffractometer was used and the scanning electron microscope was used. The product’s impurities are determined by the amount of buried powder Al. The buried powder Al content is 30% (mass content, the same below), and elemental Al exists in the product; the buried powder Al content is 10%, and the impurities are mainly Al2O3; When the Al content of the buried powder is 20%, the impurity content is the least, which is mainly oxy-magnesium-aluminum phase. The best process parameters for synthesis include constant temperature of 1400 and 60 minutes, an Al content of 17.2% and 20% of the buried powder.
Aluminum Boride: What are its applications?
Aluminum boride has a structure similar to intermetallic compound. This structure primarily depends on the crystal structure in aluminum metal and boron and not their valence relationship. AlB2, AlB4, AlB12 and AlB12 are aluminum borides. AlB2 is a diboride that can be created by reacting with two elements greater than 600. It is a layered structure. Al and B atoms are directly overlain (A,A mode), and the triangular column that forms from the direct overlap of Al molecules, i.e. the boron layers, is filled in by B atoms. [3] The structure for the boron layer looks similar to graphite. The hexagonal network of boron molecules is created by their interconnections. The distance between each boron atom and the other three atoms of the B is 0.173 nm. Six Al atoms connect to the B. These occupy the vertices the triangular prism greater. Dilute hydrochloric Acid can dissolve AlB2 to make a reducing mixture, which may include HB(OH),+. AlB2 is not soluble in dilute sulfuric acids, but is soluble in nitric. AlB2 will eventually decompose to AlB12 if it reaches 920°C.
Aluminum Boride’s main supplier
Tech Co., Ltd. () is a professional
Boride
powder
Over 12 years of chemical product development and research experience. We accept credit cards, T/T and Paypal payments. We will ship goods overseas via FedEx, DHL and by air or sea to our customers.
You can find high-quality, amorphous boron powder here
Please contact us
Send an inquiry
Introduction to Silicon Nitride si3N4 Powder Silicon nitride This is an inorganic compound, with the chemical formula Si3N4. The relative molecular mass of this substance is 140.28. Gray, off-white, or white. The…
Introduction to Silicon Nitride si3N4 Powder
Silicon nitride
This is an inorganic compound, with the chemical formula Si3N4. The relative molecular mass of this substance is 140.28. Gray, off-white, or white.
The Physical and Chemical Properties of Silicon Nitride Powder Si3N4
Si3N4 has high-temperature insoluble properties. It exhibits high-temperature creep resistance. Hexagonal system. Crystals are hexagonal. The Si3N4 density obtained using the reaction sintering process is 1.8-2.7% g/cm3, while the Si3N4 density obtained via hot-pressing is 3.12-3.22g/cm3. Mohs hardness (99.5), Vickers hardness (2200) and microhardness (32220MPa) are all 99.5. The melting point of the metal is 1900 when it is under pressure. It typically decomposes around 1900 at atmospheric pressure. Specific heat capacity is 0.71J/g*K. The heat of forming is -751.57kJ/mol. The thermal conductivity of the material is (2-155) W/(m*K). The linear expansion coefficient is 2.8~3.2×10-6/(20~1000).
Insoluble in water. Insoluble in water. The temperature at which oxygenation starts in the air is 13001400. The specific volume resistance of the air is 1.4×105 *m for 20 and 4×108*m for 500. The elastic modulus measures 2842046060MPa. Reaction sintering results in a compressive strength 490MPa. It reacts with dicalcium dialyzide at 1285 to form calcium diazide. 600 reduces the amount of transition metal and releases nitrogen oxides. The bending strength of the silicon halide is 147 MPa. It can be made by heating silica powder in nitrogen, or reacting with ammonia to make silicon halide. The resistance is between 1015-1016O.cm. It can be used in high-temperature ceramic materials.
Other than hydrofluoric acid or hot phosphoric acid silicon nitride doesn’t react with any inorganic acids. It also has strong corrosion resistance.
Silicon Nitride Si3N4 Powder Properties
|
Other names
|
silicon (IV), nitride
|
CAS No.
|
12033-89-5
|
Formula compound
|
Si3N4
|
Molecular Weight
|
140.28
|
Appearance
|
From white powder to gray powder
|
Melting Point
|
1900degC
|
Boiling Point
|
N/A
|
Density
|
2.2-3.5g/cm3
|
Solubility of H2O
|
Insoluble
|
Exact Mass
|
139.943
|
Silicon Nitride Si3N4 Powder CAS 12033-89-5
Silicon Nitride Si3N4 Pulverization
High thermal stability, high oxidation resistance and high dimensional accuracy are some of the benefits of silicon nitride clay material. The covalent compound silicon nitride has a high bond strength and will form an oxygen film in the atmosphere, which gives it excellent chemical stability. Silicon nitride can not be oxidized below 1200. A protective film can also be formed between 1200 and 1600 to stop further oxidation. Silicon nitride does not become infiltrated, or corroded from aluminum, lead or tin, silver or brass, or any other molten metals and alloys. However, it is susceptible to corrosion by magnesium and nickel-chromium alliance, as well as other molten liquids.
You can use Silicon Nitride ceramic materials in
high-temperature engineering components
,
Advanced refractory for the metallurgical sector
,
Corrosive-resistant components
Sealing components in the chemical, machining, and cutting industries.
Silicon nitride is a strong bond material that forms with silicon carbide (alumina), thorium oxide, boron and nitride, among others.
Additionally, silicon nitride may be used in
solar cells
. After the silicon-nitride nitride is plated with the PECVD process, it can be used to reduce incident light reflections. In the deposition process for a silicon Nitride film, the hydrogen atom from the reaction product enters silicon nitride wafer and silicon nitride movie, where it plays a role as a passivation problem. The ratio of silicon nitrogen atoms to silicon nitride is not strictly 4:3, but can fluctuate depending on different technological conditions. Different atomic proportions correspond to different physical characteristics of the film.
You can also use it in
Ultra-high temperatures gas turbines, aircraft engines and electric furnaces
, etc.
Main Supplier of Silicon Nitride Powder Si3N4
Technology Co. Ltd. is a trusted global supplier of chemical material and manufacturer. They have over 12 years experience in producing super high-quality chemicals, Nanomaterials, such as silicon powder.
High-quality products are what you want
Silica nitride Si3N4 granules
Please feel free and contact us to send an inquiry. (brad@ihpa.net)
Fumed silica can be described as a fine white powder that is made by high-temperature hydrolysis of silicon hailide in an oxygen flame. It is a form of amorphous silicone dioxide product….
Fumed silica can be described as a fine white powder that is made by high-temperature hydrolysis of silicon hailide in an oxygen flame. It is a form of amorphous silicone dioxide product. The primary particle sizes are between 740nm to 200-500nm. Aggregate particle sizes range from 200-500nm to about 200-500nm. Specific surface area is 100400m2/g. High purity SiO2 content is not below 99.8%. There are a number of silica-hydroxyl groups in vapor phase silicaaggregates with untreated surfaces. One is an isolated, unperturbed free hydroxyl molecule; the other is bonded silyl group that is linked and forms hydrogen bonds to one another. The vapor-phase silica aggregates have the untreated surfaces. They contain multiple -Oh compound, which can easily form an uniform three-dimensional network structure in the liquid system (hydrogen bond). This three-dimensional network structure, called the hydrogen bond, is formed by external force (shear, electric, etc.). This three-dimensional network structure (hydrogen bond), with an external force (shear, electric, etc.) will be destroyed. The medium will thin out, the viscosity drop and then the three-dimensional structure of hydrogen bond will restore itself.
Fumed silica, one of the most valuable new inorganic material, is important. It is very small in size, has a high specific surface area, high surface adsorption and large surface energy. Its high stability, reinforcing effects, thickening and thixotropy make it an irreplaceable choice in many unique fields.
It is widely used as an additive, catalyst carrier, decolorizing agent or matting agent in many industries.
Fumed silica is primarily composed of two types of “sex”, hydrophilic or waterphobic. You can use physical, chemical and mechanical methods to alter the fumedsilica interface or surface. This includes surface energy, surface wetability, reaction characteristics, surface structure, functional groups and surface wettability. This allows it to be used in modern new materials, new technology, or for the development of new technologies.
Hydrophobic fumed Silica Applications
Thickening of certain polar liquids like epoxy resins. Silicone elastomer reinforcement. High addition. Good hydrophobicity. Improved anticorrosion. Powder flow AIDS.
Technology Co. Ltd. is a trusted global supplier and manufacturer of chemicals and nanomaterials. They have over 12 years experience in producing super high-quality chemicals.
If you are interested in high-quality fumed silicona at a very reasonable price, please get in touch with us. (brad@ihpa.net)
Melting PointSodium chloride, also known as salt, is a common and widely used chemical. It is the main component of table salt and is a vital part of our diets and our…
Melting Point
Sodium chloride, also known as salt, is a common and widely used chemical. It is the main component of table salt and is a vital part of our diets and our lives. It is used as a food preservative, as a source of sodium and chloride compounds for use in road deicing, fire extinguisher, water softening and in many industrial applications.
The boiling point of molten sodium chloride is 1,413 degrees celcius.
Whenever we dissolve any ionic compound in water it will always have a high melting and boiling point because the strong electrostatic forces of attraction between the ions requires a lot of energy for breaking the bonds between them. This is the reason why ionic salts like sodium chloride have a very high boiling and melting point as it takes a lot of heat to break those bonds.
So why is it that silver chloride has a lower melting point than sodium chloride?
The answer is simple. In silver chloride the atoms of the metal are held together by metallic bonds which are weaker than those in sodium chloride. These weaker bonds don’t take much heat energy to break and so the silver chloride has a low melting point.
Another reason why the melting point of sodium chloride is higher than that of silver is because the atoms in silver chloride have more coloumbic forces of attraction between them. In silver chloride the positive ions of the ion are surrounded by six chlorine ions while in sodium chloride the ions are surrounded by eight chloride ions. The extra chloride ions create more attraction between them which makes the structure more stable.
About Sodium alpha-olefin sulfonate:Sodium alpha-olefin sulfonate has the characteristics of rich and fine foam, low degreasing power, low irritation to skin and hair, and good biodegradability.Tqhp is a trusted global Sodium alpha-olefin…
About Sodium alpha-olefin sulfonate:
Sodium alpha-olefin sulfonate has the characteristics of rich and fine foam, low degreasing power, low irritation to skin and hair, and good biodegradability.
Tqhp is a trusted global Sodium alpha-olefin sulfonate. Feel free to send an inquiry to get the latest price of Sodium alpha-olefin sulfonate if you would like to buy Sodium alpha-olefin sulfonate in bulk.
Product Performance of Sodium alpha-olefin sulfonate:
Sodium alpha-olefin sulfonate can improve the combability and softness of the hair, and its mild decontamination performance makes the skin comfortable after washing.
Technical Parameter of Sodium alpha-olefin sulfonate:
Product Name | Short Name | Purity | PH | Odor | Appearance |
---|
Sodium alpha-olefin sulfonate | AOS | 97% | NA | Slight characteristic odor | White powder |
Applications of Sodium alpha-olefin sulfonate:
It has excellent wettability, detergency, good foaming power, emulsifying power; easy to dissolve in water, strong lime soap dispersing power, resistance to hard water; good biodegradability, and mild to the skin; compatibility Good performance. It is widely used in various washing cosmetics, as the main raw material of washing powder, composite soap, tableware detergent, and phosphorus-free detergent. It can be used in cleaning cosmetics such as shampoo, shower gel, facial cleanser, etc. It can also be used in industrial detergents.
Packing & Shipping of Sodium alpha-olefin sulfonate:
We have many different kinds of packing which depend on Sodium alpha-olefin sulfonate quantity.
Sodium alpha-olefin sulfonate packing: 1kg/bottle, 25kg/barrel, or 200kg/ barrel.
Sodium alpha-olefin sulfonate shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.
AOS Sodium Alpha-olefin Sulfonate Properties |
Other Names | N/A |
CAS No. | 68439-57-6 |
Compound Formula | RCH=CH(CH2)n-SO3Na |
Molecular Weight | N/A |
Appearance | NA |
Melting Point | N/A |
Boiling Point | N/A |
Density | N/A |
Solubility in H2O | N/A |
Exact Mass | N/A |
AOS Sodium Alpha-olefin Sulfonate Health & Safety Information |
Signal Word | N/A |
Hazard Statements | N/A |
Hazard Codes | N/A |
Risk Codes | N/A |
Safety Statements | N/A |
Transport Information | N/A |
The introduction of sodium batteries is expected help alleviate current limitations of lithium resource scarcity on rapid development of new energy industry. The lithium-ion battery is an essential raw material for the…
The introduction of sodium batteries is expected help alleviate current limitations of lithium resource scarcity on rapid development of new energy industry.
The lithium-ion battery is an essential raw material for the development of energy devices and achieving the goal to be carbon neutral. However, the current capital investment in the raw materials end is not sufficient to meet rapidly increasing energy demand. Additionally, there is a clear structural imbalance in the investment made in the lithium electric sector chain. This leads to rising prices for lithium raw materials.
sodium cells entered the field of vision. As an energy material, sodium is abundant in nature. It also has high capacity and high rate performance which can compensate for the limitations of lithium-ion cells in the current energy storage area. Despite the fact that sodium battery is more expensive than lithium battery because of its smaller supply chain, sodium battery with mature technology will still be an effective replacement for lithium batteries. In fact, it can even be used to develop new energy fields with lithium battery.
Tungsten Disulfide will also benefit from increased market replenishment as a potential material for batteries.
Tungsten dioxide is a layered metal with remarkable surface effect, electron fluidity. The material also has high thermochemical stability and high density electron states. It is widely used in sodium and lithium storage. As an example, nanocomposites that are used as conductive additions or graphene-composite as anode for batteries can have a higher specific capacity and discharge rate than single components WS2 and C.
Graphene, a novel anode material, has been a focus of energy storage researchers for many years. It is a versatile anode material with many benefits such as high electrical and thermal conductivity and large specific surface areas. Although it is an energy storage medium, it does not compensate for its own flaws. For example, the material is susceptible to structural collapse during a long cycle which could lead to a substantial decrease in battery power. Graphene, WS2 and other nanomaterials can be used to compensate for the graphene’s weaknesses.
The best choice for batteries materials is generally tungsten disulfide.
Technology Co. Ltd. is a trusted global supplier and manufacturer of chemicals and Nanomaterials. They have over 12 years experience in producing super high-quality chemicals, such as silicon powder.
You can contact us to request high-quality tungsten sulfide WS2 WS2 powder or graphene powder. (brad@ihpa.net)
Overview of Aluminum Diboride Powder Aluminum boride AlB2 (or AlB2) is a binary mixture made of aluminum and boron. It is a red solid at normal pressure and temperature. It loses its…
Overview of Aluminum Diboride Powder
Aluminum boride
AlB2 (or AlB2) is a binary mixture made of aluminum and boron. It is a red solid at normal pressure and temperature. It loses its glossy surface when heated. It is stable when it is in cold dilute acid. However, it will decompose in hot hydrochloric or nitric acid. Mixing fine powders of aluminum or boron and heating them after reacting.
It is one among two aluminum-boron compound, the other being AlB12, also known as aluminum boreide. AlB12, a monoclinic crystal that is black and shiny with a specific gravity of 2.55 (18degC), It is insoluble when it comes into contact with acid, water, and alkali. It is formed by melting aluminum, sulfur and boron trioxide. AlB2 has a single crystal that is parallel to the hexagonal structure of the matrix.
Aluminum Boride is a dangerous substance as it reacts to acid and hydrogen to make toxic gases. To release borane, and aluminum chloride, it reacts to hydrochloric acid.
AlB2 (alluminium diboride) has a structure that is very similar to graphite flakes. It is found between the B and B atoms of aluminum diboride (AlB2), which is very similar with the structure in magnesium diboride. AlB 2 single crystal shows metal conductivity along an angle parallel to the hexagonal plan of the substrate.
The AlB2 crystal structure is used to describe intermetallic compound prototype structures. The AlB2 structure structure family has many different types.
Aluminum Diboride AlB2 Powder CAS 12041-50-8
What are the applications of Aluminum Diboride Powder
Aluminum boride can be described as a light yellow, white, or random-colored powder. It can be used in the following ways:
Non-toxic flame retardant
plastics,
rubber,
textiles,
coatings,
Magnets with superconductivity
transmission lines,
Magnet field detectors that are sensitive.
The main supplier of
Aluminum Diboride Powder
Tech Co., Ltd. () is a professional
Boride powder
Over 12 years’ experience in chemical products development and research. We accept credit cards, T/T and West Union payments. We will ship goods overseas via FedEx, DHL and by air or sea to our customers.
You can find high-quality powdered boron carbide here
Please contact us
Send an inquiry
What does nano silicon mean? You can make nano silicon in one of two ways. First, you can reduce rice husks to magnesiothermic levels. It is an abundant byproduct of rice cultivation….
What does nano silicon mean? You can make nano silicon in one of two ways. First, you can reduce rice husks to magnesiothermic levels. It is an abundant byproduct of rice cultivation. Nano-Si can be produced using this technique with the same reversible capability and conductivity of traditional silicon.
Nano-Si’s surface activity is high and it has high purity. The Nano-Si has a large surface area, and it is not toxic. It’s often used to power high-power light sources. To generate light, these devices only use small amounts of nano-Si. These nano-Si nanoparticles are about five nanometers across.
You can synthesize silicon nanoparticles by either chemical vapour deposit or mechanical ball grinding. Also, plasma evaporation can be used to produce silicon nanopowder. In western countries, nano-Si powder is produced industrially by specialised firms. Chemical book of Japan (Chemical book), DuPont of USA, H.C. Stark of Germany and Tekner of Canada are just a few of these companies. This company produces a high-purity nano-Si Powder with different sizes.
Nano-Si is made of porous networks of silicon nanoparticles. HRTEM makes this network visible. These nanoparticles measure 8-10 nm diameter. Larger particles can be found in smaller quantities. High porosity in nano-Si Powder is due to selectively etching embedded particles. This material is also protected from localized melting by a solvent (NaCl).
Why is nanopowder so important?
The nano silica gas is a type of mineral having a very large surface area. The amorphous silica in nano silica fume is higher than that of quartz powder. This can affect chemical and physical reactivity. It is 33% more active than quartz powder and has a higher Pozzolanic Activity Index (which is about 330 times as high as a gram or pozzolan). The difference in aluminium oxide content in quartz and silica fume is what causes this.
The mechanical properties of concrete are enhanced by nano silica fume. By thickening concrete paste, it helps speed up the drying process and increases concrete density. This improves concrete’s compressive strength and flexural strength. Concrete mix composition will be determined by the percentage of silica gase.
Nano-silica fume is being investigated in concrete for various purposes. This can be used to enhance concrete strength or as a catalyst in the formation of new materials. It can be used to produce high-performance plastics and abrasives. You can use the fume to produce ceramics. There are many ways to obtain nanosilica, such as f-type flyash or silica fume.
What exactly is nano silica?
What is nanosilica powder? It is possible to make a nano silica product using the alkaline extraction method, according to a recent study. This process is an alternative to oxidizing RHA and requires high energy inputs. Alkaline extraction is combined with acid precipitation to create this new approach.
A nano silica dust is made of particles of various sizes, shapes and orientations. Both colloidal and dried forms are available. Although colloidal nanoparticles form suspensions, they can behave differently in dry forms.
A variety of agricultural products, such as ricehusk, can be used to make high-purity nano-silica powder. This silica-rich source is environmentally friendly. It is cost-effective, reliable and easy to do.
How does nanosilicon get made?
New processes have been invented to create spherical silicon Nanowires. The process releases silicon atoms by using high-energy electrons. This results in a silicon microparticle measuring between 20-80 nanometers in size. This process could be applied to other materials, the researchers believe.
Ultrasonication or electrochemicaletching are the main two methods to produce nanoparticles out of porous silica. It’s easy to form a nanocrystalline coating from porous silicon, which is used as the base material in hybrid preparations. Once a thin film of the film has been formed, it can then be broken down into nanoparticles using various methods, including ultrasonics.
To heat the raw material in a plasma thermal at high temperatures, this process is initiated. Vaporized silicon nuclei are produced by the high-energy plasmajet. They are extracted from the inside of the tube and the chamber cover. The field emission scanning electron microscopic analysis of these silicon nanomaterials is then used. The size is measured using image processing software. The final product is identified via X-ray diffusion.
What is the impact of nanoparticles on side effects?
Small particles known as nanoparticles can pose a threat to human health or other living organisms. Many studies on the health effects of nanoparticles have been conducted in humans. However, there is not enough information to determine if the same dangers exist for other species. Study on subjects has shown that nanoparticles increase the chance of lung injury, cardiovascular disease and olfactory epithelium harm.
While nanoparticles have many applications in biomedicine and are biocompatible with other substances, some people are concerned about their toxic effects. There may be a variation in the level of toxicity depending on where the particles are deposed. Research is underway to better understand how toxic substances work and the ideal concentration for human consumption.
They have great potential in medicine. Nanoparticles are useful as contrast agents, drug delivery devices, or fluorescent labels. One-dimensional nanoparticles have a size range of 1 to 100 nanometers. Their small size allows them to penetrate cell membranes, and can stabilize proteins. After endocytosis, nanoparticles are able to escape lysosomes.
Who invented nano silica?
The effectiveness of nano silica fume as a nanotechnology material depends on several factors. The first is the extremely tiny size of its particles. Around 95% of its particles are under 1mm. The second is its excellent physical characteristics, making it an ideal material for nanotechnology. The material comes in either a premium or grey color and is composed of 100% pure silica. It’s non-crystalline. This material is easily identifiable by its Xray-ray diffraction characteristics.
It is an extremely fine powder and can be used in many different applications. This by-product from silicon smelting is a pozzolanic and amorphous substance with an average particle size of 150nm. It’s used to make high-performance concrete, and in other applications that use a high-performance product. Although it is sometimes confused with fumed silicona, they are quite different.
The first research found that the concrete’s compressive strength was increased by nano silica gase. This was especially true for concretes with high levels of fly ash. The concrete’s incorporation of it increased the strength at early age and compressive strength to 28 days.
Can silica cause side effects?
It is used to make a wide range of concretes. Silica fume has a high resistance to acids and alkalis as well as other aggressive substances. There are some drawbacks to it:
It can be difficult to compact and place.
Concrete mixes are more water-soluble when silica fume is added.
It is expensive to make silica fume cement without a plasticizer.
Silica fume has a wide range of applications in building construction, including high-rise structures. The silica fume’s fine particles improve concrete’s bond strength, which in turn enhances the mechanical properties. It is also useful in ship constructions and ships.
Many advantages include a shorter setting time, and improved concrete mechanical properties. Nano silica can improve durability and hydration as well as reduce construction costs. This can help to reduce bleeding and enhance early strength development.
Is nano silica eco-friendly?
The form of silica fume, which is also known as micro-silica can be used in concrete production. Use of nanosilica in concrete can reduce the waste material. Numerous studies have found that nanosilica is harmful to human health. Concrete and mortar are not currently able to substitute for nanosilica.
NS and SF use is growing exponentially but it is also raising concerns about the health and environment of these substances. Leakage of groundwater into the environment can present serious safety concerns. Silicosis has been associated with crystalline silica powder. This is potentially deadly lung disease. This risk is not present with amorphous silicon dioxide fume.
Nanosilica as well as microsilica share similar pozzolanic properties. But nano silica comes in a smaller size with a larger specific area. This makes it react faster to cement.
Nano Silicon Powder Price
Price is affected by many things, such as the demand and supply in the market and industry trends. Economic activity. Unexpected events.
Send us an enquiry to get the best Amorphous Boron powder price. (brad@ihpa.net)
Nano Silicon Powder Supplier
Technology Co. Ltd. has over 12 years experience as a reliable supplier of Amorphous Boron Powder. All of our products are available for shipment worldwide.
We can help you find Amorphous Boron Powder. Please contact us to send an inquiry. (brad@ihpa.net)
Copper acetate monohydrate is a bluish-green solid, soluble in water. It is also slightly soluble in methanol, diethylether and acetone.Often referred to as cupric acetate, it is a complex compound that can…
Copper acetate monohydrate is a bluish-green solid, soluble in water. It is also slightly soluble in methanol, diethylether and acetone.
Often referred to as cupric acetate, it is a complex compound that can be synthesized via a redox reaction of acetic acid solutions with either copper(II) carbonate or copper(II) hydroxide. Large-scale commercial production is accomplished by placing copper metal in the presence of air and refluxing acetic acid.
It has been used in various applications for many centuries including as a pigment in ceramics and as a fungicide known as Paris green. It is a powerful catalyst in polymerization of organic compounds and as a mordant in the dying of textiles.
The main drawback of cupric acetate is its irritant and toxic properties which can cause serious skin burns, eye irritation and possible respiratory illness. However, the anhydrous version can be safely stored in closed containers in a cool dry place.
The best way to get your hands on a high quality copper acetate is to purchase it from a reputable supplier and make sure you are getting the true copper acetate monohydrate with no added fillers. In the end you will get a much higher grade product and a safer chemical for your lab.
What is Hexagonal Borion Nitride? Hexagonalboron Nitride (HBN) ceramics are essential microwave communication materials in aerospace. H-BN, a covalent-bond compound, has a low selfdiffusion coefficient at high temperature and is difficult to…
What is Hexagonal Borion Nitride?
Hexagonalboron Nitride (HBN) ceramics are essential microwave communication materials in aerospace. H-BN, a covalent-bond compound, has a low selfdiffusion coefficient at high temperature and is difficult to sinter. It is most commonly prepared through hot pressing sintering. The hot pressing pressure and temperature can be very high. This makes it difficult to create complex-shaped ceramic products. Reaction sintering and high pressure gas-solid combustion are still options, but it is hard to get sintered products that are satisfactory in size and shape. Following mechanochemical activate with hexagonal Boron Nitride Powder, press-free sintering was done on H-BN ceramics in order to achieve 70% of the AlN ceramics’ relative density.
The characteristics and applications of hexagonal Boron Nitride
Hexagonalboron nitride is a solid material with incredible potential. This attracts more and more attention around the globe. Professor Bernard Gil (National Centre for Scientific Research), as well as Professor Guillaume Cassabois from the University of Montpellier made important contributions to the physics of this fascinating material and to its ability to interact and control electromagnetic radiation. Professor James H. Edgar from Kansas State University in the United States is working with them to explore the use of hexagonalboron Nitride to develop quantum information technologies. Professor Edgar has been working on advanced technologies to make high purity boron Nitride crystals.
Hexagonalboron Nitride (hBN), a versatile solid material, plays an important role in many traditional applications. It can be used for lubrication, cosmetic powder formulations, thermal control, neutron detection, and other purposes. HBN, which was originally synthesized in 1842 from a fragile powder, has a layered structure that is different than graphite. This includes tightly bound N andB atoms, arranged in a network plan of weak interactions that are superimposed on one another. In a similar way, graphene is possible to be extracted from graphite. Monolayers of hBN are also available. hBN actually sits at the intersections of two worlds. It is widely used in shortwave, solid-state light sources as well as layered semiconductors such a graphene and transition metallic halogens. Nevertheless, hBN exhibits distinct properties from both these classes of materials making it a potentially widespread candidate material.
HBN crystal growth
Since 2004, the field of hBN research and its application has seen a breakthrough in the form of new techniques to grow large (approximately 110.2 mm3) single crystals. Kansas State University’s Professor Edgar and his colleagues have played an important role in this area. They investigated the factors that influence the growth of crystals, their quality, and how they are affected by doping impurities or changing the boron ratio. HBN crystals are formed from solutions of molten elements, such as chromium or nickel or iron and chrome, and can dissolve boron. Professor Edgar and collaborators demonstrated crystals made of pure boron were more stable than those made from hBN granules. They also examined the effects of gas composition, metal solvent selection, and crucible type upon the growth process.
Additionally, the research team developed new techniques to produce isotopically pure HBN crystals. Natural boron can be described as a mixture of two isotopes, either boron-10 (20%) or boron-11 (80%). Although they have different nuclear masses, the chemical properties are identical and produce an indistinguishable structure for hBN. However, the LATTICE (or hBN) of an isotope has a profound impact on its vibration modes, also known by phonons. Crystals with boron-10 or boron-11 have longer phonon lifespans. Random distribution of boron Isotopes in crystals causes phonon modes disperse more often and reduces their life expectancy. The hBN has only one boron Isotope. Phonon scattering is decreased and the lifetime of phonons is extended. This reduces the hBN’s thermal conductivity and makes it more efficient at dissipating warmth. Its optical characteristics are also very important, especially in the field nanophotonics. This is the study of light reduced to dimensions below free space wavelengths. In this instance, the wavelength of light for h10BN has been reduced by a factor 150.
Quantum information technology and HBN
Modern quantum technology relies on the ability of individual photons to be generated and manipulated. Single-photon sources emit light, unlike traditional thermal sources like incandescent lamps or coherent sources (lasers), in the form single quantum particles (photons). These photons interact with each other and can be used for storage and generation of new information in quantum computing. In some cases, single-photon source can be a defect in crystal structures caused by impurity and atoms. In the case hBN, the possibility of a high-density defect combined with a large range provides an opportunity for a support single-photon source. Quantum applications are significantly more spectral than pure nanophotonics, as they require higher sample purity.
Photoluminescence experiments with hBN samples containing C and Si impurities showed that the spectral characteristics are significantly higher at 4.1eV light energy than pure hBN. Single-photon emission has been reported in recent cathode luminescence studies (in which phonon emissions are induced by an electronic beam), but it is not seen in photoluminescence. In photoluminescence experiments, many spectral lines lower than 4 eV have been seen. These may be due to single-photon emission defect in this energy range. These defects are still controversial. Although the phenomena of single-photon emitting hBN is complicated, the research of Professors Edgar Gil, Cassabois and Cassabois provides solid evidence of the extraordinary capabilities of this material in quantum technology.
Hexagonal Boron Nitride supplier
(aka. Technology Co. Ltd. (aka. Our company is currently working on a variety of materials. Our Hexagonal Boron Nitride BN Powder is high in purity, fine particle size, and low in impurity. Send us an email, or click on one of the products to send an inquiry.