Is Exposure to Boron Carbide Harmful to the Human Body?

Boron carbideis an important ceramic with excellent properties. Also known as synthetic diamond, it is a form of boride that is high in hardness. It doesn’t react with acids or alkali solutions. The price is low and it is easy-to-make. It is commonly used for grinding, grinding and drilling hard materials. Boron Carbide was discovered for the first time in 1858. Its hardness, which is second only to that of diamond and cubic boron, nitride, in nature, is remarkable. This hardness, together with its near-constant high temperatures hardness (>30GPa), is unmatched by any other materials. Boron Carbide has also been a key member of the hard metal family. Boron carbide B4C Powder features high melting point (2450), high softness, high modulus and low density (2.52g/cm3). It has excellent neutron absorption capability, low expansion coefficient and thermoelectric property. It is widely used in refractory material, engineering ceramics and nuclear industry.

Boron Carbide has many shortcomings. It is difficult to use in industry due to its low fracture toughness, high melting temperature, poor oxidation resistance, and poor metal compatibility. It is still in development.

Boron Carbide can cause irritation, so you need to take certain precautions if you are in contact with it for a long time. Avoid inhalation and skin contact with Boron Carbide powder. Boron Carbide powder will not cause silicosis if the patient inhales only a small amount. Silicosis can be reduced if the patient avoids the substance. Inhaling the powder may cause irritation in the lungs. If this happens, the lungs can develop silicosis.

Boron carbide‘s hardness is lower than industrial diamond, but more than silicon carbide. This material is more brittle that most pottery. It has a large cross section for thermal energy neutron capture. Strong chemical resistance. Hot hydrogen fluoride, nitric acid and other chemicals do not attack. It is soluble in molten alkali and insoluble in water. Relative density of 2.5082.512. Melting point 2350 . Boiling point 3500 Boron Carbide has the ability to absorb a large amount of neutrons, without forming radioisotopes. This makes it an ideal neutron absorber in nuclear power stations. These neutron absorbers control the rate at which nuclear fission takes place. Boron Carbide can be used to create controllable rods within nuclear reactors. But, it is also sometimes powdered to increase its surface area.

In 1986, the Chernobyl nuclear incident resulted in a front-line Russian aviation regiment being transferred to the east. Helicopters from Mi-8 through Mi-26 were then immediately used in the airlift mission. . Boron Carbide drops regular sand once it runs out. The drop makes flying easier. After the helicopter dropped nearly 2000 tons of Boron Carbide sand, engineers announced that the reactor’s chain reaction had stopped. The helicopter was eventually able to carry 5,000 tons. Boron Carbide has been used long-term as a grit and abrasive because it is harder than silicon carbide. Because of its high melting point it is not easily cast into artificial products. However, it can be melted to make simple shapes. It can be used for the grinding, drilling, drilling, and polishing of hard materials, such as precious stones and cemented carbide. Boron Carbide can also serve as a ceramic coating on warships and helicopters. This is a light-weight material that resists armor-piercing projectiles. It is used in the manufacturing of gun nozzles. Boron Carbide may also be used in the production of metal borides as well in the smelting, alloying and special welding of sodium boron.

Tech Co., Ltd. is a professional BoronCarbide Powder supplier. It has over 12 years’ experience in chemical product development and research. We accept payments via Paypal, T/T or West Union. We will ship goods overseas via FedEx, DHL and by air or sea to our customers.