If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
What is silicon nitride (SiN)?
The chemical formula for silicon nitride, Si3N4, is inorganic. It is a ceramic material of high strength, with inherent lubricity and wear resistance. It is a crystalline atomic structure that is resistant against oxidation. It is also resistant to the impact of both cold and heat. It will not break if it’s heated to over 1000degC and then quickly cooled, followed by a rapid heating. The excellent characteristics of silicon-nitride ceramic are the reason why it is used in many mechanical components, such as bearings and turbine blades. It can also be used to produce mechanical seal rings, permanent moldings, etc. When silicon nitride is used for the heating surfaces on engine components, it can not only improve the quality of an engine, but also fuel efficiency and thermal efficiency. China, Japan, the United States and other countries are developing such engines.
How to prepare silicon nitride
It is widely used in China. The method is simple and inexpensive. Metal silicon powder is heated with nitrogen or ammonia in an atmosphere. The metal silicon and nitrogen source react directly, forming silicon nitride.
This method is cost-effective and requires little equipment. The metal silica powder nitridation is an exothermic process. If heat is not released at the right time during nitriding, metal silicon powder nearby will melt and cause problems. The result of the nitriding. The nitriding process is controlled by the temperature, speed and particle size. The synthesised silicon nitride comes in a block-like shape. The silicon nitride must be prepared by other methods such as ball milling, which are not very efficient and introduce impurities into the process.
In the presence of high-temperature nitrogen, SiO2 is reduced with carbon powder. SiO2 is reduced to gas-phase SiO first, and the gas-phase SiO reacts to nitrogen in atmosphere to produce silicon nitride.
Thermal decomposition uses SiCl4 to react at low temperature with ammonia gas in order to obtain solid imino silica (Si(NH2)), or amino silica (Si(2)NH4). These two silicides may be decomposed under high temperature conditions to yield nitride Silicon. This method can be used to prepare large quantities of high purity silicon nitride in a very short time. The silicon nitride prepared by this method is of uniform particle size, high purity and can be used to prepare high-quality nitride Powder. At present, the method is used to produce high-quality and high-purity silicon nitride.
Tech Co., Ltd. () has over 12 years of experience in the chemical products research and product development. We accept payment by Credit Card, T/T (wire transfer), West Union, or Paypal. The goods will be shipped to overseas customers via FedEx or DHL.
Contact us to send an inquiry if you need high-quality Si3N4 powder.